Symantec 5 Verifying the LLT, GAB, and VCS configuration files, See Setting the Path variable on

Verifying the VCS installation 113

Verifying the LLT, GAB, and VCS configuration files

PathName = "/opt/VRTSat/bin/vxatd"

)

//resource dependency tree

//group VxSS

//{

//Phantom phantom_vxss

//ProcessOnOnly vxatd

//}

Verifying the LLT, GAB, and VCS configuration files

Make sure that the LLT, GAB, and VCS configuration files contain the information you provided during VCS installation and configuration.

To verify the LLT, GAB, and VCS configuration files

1Navigate to the location of the configuration files:

■LLT /etc/llthosts /etc/llttab

■GAB /etc/gabtab

■VCS /etc/VRTSvcs/conf/config/main.cf

2Verify the content of the configuration files.

See “About the LLT and GAB configuration files” on page 105. See “About the VCS configuration file main.cf” on page 107.

Verifying LLT, GAB, and cluster operation

Verify the operation of LLT, GAB, and the cluster using the VCS commands.

To verify LLT, GAB, and cluster operation

1Log in to any node in the cluster as superuser.

2Make sure that the PATH environment variable is set to run the VCS commands.

See “Setting the PATH variable” on page 47.