Symantec 5 manual Licensing VCS, See Checking licensing information on the system on

Installing and configuring VCS 63

Installing and configuring VCS 5.0 RU3

To specify system names for installation

1Enter the names of the systems where you want to install VCS.

Enter the system names separated by spaces on which to install VCS: galaxy nebula

For a single node installation, enter one name for the system.

See “Creating a single-node cluster using the installer program” on page 139.

2Review the output as the installer verifies the systems you specify. The installer does the following:

■Checks that the local node running the installer can communicate with remote nodes

If the installer finds ssh binaries, it confirms that ssh can operate without requests for passwords or passphrases.

■Makes sure the systems use the proper operating system

■Checks whether VCS is installed

Licensing VCS

The installer checks whether VCS license keys are currently in place on each system. If license keys are not installed, the installer prompts you for the license keys.

See “Checking licensing information on the system” on page 84.

To license VCS

1Review the output as the utility checks system licensing and installs the licensing RPM.

2Enter the license key for Veritas Cluster Server as the installer prompts for each node.

Enter a VCS license key for galaxy: [?] XXXX-XXXX-XXXX-XXXX-XXXXXXX-XXXX-XXXX-XXXX-XXXsuccessfully registered on galaxy

VCS license registered on galaxy