Symantec 5 manual Addprpl command

36 Preparing to install VCS

Preparing to configure the clusters in secure mode
identity	The value for the authentication broker identity, which
	you provided to create authentication broker principal
	on the root broker system.
	This is the value for the --prplnameoption of the
	addprpl command.
	See “Creating authentication broker accounts on root
	broker system” on page 34.
password	The value for the authentication broker password,
	which you provided to create authentication broker
	principal on the root broker system.
	This is the value for the --passwordoption of the
	addprpl command.
	See “Creating authentication broker accounts on root
	broker system” on page 34.
broker_admin_password	The value for the authentication broker password for
	Administrator account on the node. This password
	must be at least five characters.

3For each node in the cluster, create the input file for the encrypted file.

The installer presents the format of the input file for the encrypted file when you proceed to configure the Authentication Service using encrypted file. For example, the input file for authentication broker on galaxy resembles:

[setuptrust]

broker=venus.symantecexample.com

hash=758a33dbd6fae751630058ace3dedb54e562fe98

securitylevel=high

[configab]

identity=galaxy password=password

root_domain=vx:root@venus.symantecexample.com root_broker=venus.symantecexample.com:2821 broker_admin_password=ab_admin_password start_broker=false

enable_pbx=false

4Back up these input files that you created for the authentication broker on each node in the cluster.