Switch Information, Management Setup Menu | Linksys Etherfast

EtherFast® Series

Switch Information

The Switch Information screen displays hardware and firmware version num- bers for the main board, as well as the power status.

•Hardware Version - Hardware version of the main board.

•Firmware Version - System firmware version in ROM.

•Serial Number - Serial number of the main board.

•Number of Ports - Number of ports available on this Switch.

•Power Status - Shows if power is active or inactive.

•Fan Power Status - Shows if power to fan is active or inactive.

•G1 Information - Speed of the first Gigabit port.

•G2 Information - Speed of the second Gigabit port.

Select OK to return to the previous panel.

EtherFast® Managed 24-Port with Dual Gigabit Switch

Management Setup Menu

The Management Setup Menu screen allows you to adjust the communication parameters, ensuring a reliable connection. The new administrator password is set through this menu. The IP parameters for Web, telnet, or SNMP/RMON management are set here as well.

•Network Configuration - Includes IP setup, ping facility, and HTTP setup for the on-board Web agent.

•Serial Port Configuration - Sets communication parameters for the serial port, including baud rate, console time-out, and screen data refresh inter- val.

•SNMP Configuration - Activates authentication failure traps and config- ures communities and trap managers.

•User Configuration - Sets the user names and passwords for system access.

•TFTP Download - Downloads new version of firmware to update your system.

•Configuration File - Allows downloading of a configuration file.

Select OK to return to the previous panel.

16

17

Image 11

Linksys Etherfast manual Switch Information, Management Setup Menu

Contents

EtherFast Managed 24-Port With Dual Gigabit Switch Copyright & Trademarks Introduction Table of Contents LEDs Getting to Know the SwitchPackage Contents Console Port RJ-45 PortsGigabit Ports Powering on the Switch Installing the SwitchPre-Installation Considerations Rack-Mounting the Switch Overview Switch Management Web Management Main Menu Configuring the SwitchLogging On to the Switch System Information System Information Menu Management Setup Menu Switch Information IP Configuration Network Configuration IP Connectivity Test Ping Http Configuration Snmp Configuration Serial Port Configuration IP Trap Managers Snmp Communities Add User User Configuration Tftp Download Configuration File Device Control Menu Layer 2 Menu System Mode Mirror Port Configuration Port Configuration Static Unicast Address Configuration Port Trunking Configuration Add Static Address Entry Static Multicast Address Configuration Bridge Menu Add Multicast Address Entry Spanning Tree Port Configuration Bridge Configuration Vlan Menu Vlan Port Configuration Vlan and Priority Vlan Table Configuration IP Menu Subnet Configuration Add Subnet Protocol Configuration RIP Configuration ARP Configuration Static ARP Table Bootp Relay Database ConfigurationAdd Bootp Relay Server Static Route Table Add Static ARP Entry Add Routing Entry Default Route Menu Security Menu MAC Filtering Configuration Add IP Address Filter Security ModeIP Security Filtering Configuration Add MAC Address Filter Network Monitor Menu Igmp Snooping Configuration Interfaces Group Port Statistics/Statistics MenuPort Statistics Ethernet-Like Rmon Statistics Layer 2 Address Table Spanning Tree Port Information Spanning Tree Bridge Information Vlan Information Vlan Forwarding Information Vlan Dynamic Registration Information IP Multicast Registration Table ARP Table Subnet Information Multicast Table Menu Routing Table Igmp Cache Dvmrp Routing Table Multicast Forwarding Cache System Restart Menu Dvmrp Neighbor Table Exit TroubleshootingCommon Problems and Solutions Tion Upgrading Firmware via the Serial Port Your firmware has now been updatedAppendix Glossary 101 103 Environmental SpecificationsWarranty Information Web FTP Site Tech Support RMA Issues FaxContact Information Sales Information T p / / w w w. l i n k s y s . c o m