EtherFast® Series

Routing Table

The Routing Table lists the routes through which all recognized Ethernet networks (and corresponding VLAN) can be reached.

Destination Network - A destination network, subnet, or host.

Destination Mask - The subnet mask that specifies the bits to match.

VLAN - The VLAN within which the gateway or destination address resides.

Next Hop - The IP address of the router at the next hop.

Type - The IP route type for the destination network.

Direct: A directly connected subnetwork

Indirect: A remote IP subnetwork or host address

Myself: A switch IP address on a specific IP subnetwork

Bcast: A subnetwork broadcast address

Mcast: An IP multicast address

Invalid: An illegal IP address to be filtered

EtherFast® Managed 24-Port with Dual Gigabit Switch

Protocol - How the route was learned.

Local: Manually configured

Mgmt: Set via SNMP

ICMP: Obtained via ICMP redirect

RIP: Learned via RIP protocol

Other: Learned by some other method

Select Apply to make changes. Select OK to return to the previous panel. Select Prev Page to view the previous page. Select Next Page to view the next page. To display a specific page, set the page number in the Page field and then press Apply. Select Flush RIP to flush the RIP protocol.

Multicast Table Menu

The Multicast Table Menu offers a variety of multicasting settings.

Multicast Registration Table - Displays all the multicast groups active on the Switch, including the multicast IP address and the corresponding VLANs. (See page 80.)

IGMP Cache - Cache for IGMP.

84

85

Page 45
Image 45
Linksys Etherfast manual Routing Table, Multicast Table Menu