EtherFast
®
Managed 24-Port with Dual Gigabit Switch
The System Restart Menu resets the management agent.
• Reload Factory Defaults- Reloads the factory defaults.
• [Restart] - Restarts the Switch.
Note: When restarting the system, it will always run the Power-On Self-
Test. It will also retain all system information, unless you select to reload
the factory defaults.
Select Restart to restart the Switch. Select Cancel to cancel the system
restart.
91
EtherFast
®
Series
DVMRP Neighbor Table
The DVMRPNeighbor Table shows information about the neighbors
used for the Distance-Vector Multicast Routing Protocol.
• Interface - The IPinterface on this Switch that connects to the
upstream neighbor.
• Neighbor Address - The IP address of the network device
immediately upstream for this multicast delivery tree.
• UpTime- The time since this device last became a DVMRP neigh-
bor to this Switch.
• ExpireTime - The time remaining before this entry will be aged
out.
• Ver - The neighboring router’s DVMRPversion number.
• RcvRoute - The total number of routes received in valid DVMRP
packets from this neighbor. This can be used to diagnose problems
such as unicast route injection, as well as giving an indication of
the level of DVMRP route exchange activity.
Select Applyto make changes. Select OK to return to the previous panel.
Select Prev Page to view the previous page. Select Next Pageto view the
next page. To display a specific page, set the page number in the Page field
and then press Apply.
90
System Restart Menu