Panasonic SA-XR50 specifications Audio settings

Audio settings

6.1CH DECODING	BASS	MULTI-SOURCE	TUNE 1
	SYNTHESIZER	RE-MASTER

	SPEAKERS	DTS
	A	B
^
8	6.1CH DECODING

VCR 2

VIDEO IN L AUDIO IN R

MULTI CONTROL INPUT SELECTOR VOLUME

DOWN UP

PHONES

SUBWOOFER

CENTER MULTI FOCUS REAR

NAVIGATOR		LIST
w	ENTER	q
DISPLAY		RETURN
TV VOL –	r	TV VOL +

DVD RECORDER

HELP DIMMER TV/AV DVD/HDD

SUBWOOFER	TEST	–	+
		w	q
CENTER	MULTI
FOCUS	REAR	LEVEL	EFFECT
STEREO/	%PL	DTS	SFC
2CH MIX		NEO:6

Bass synthesizer
Provides depth of bass for audio play with impact.								• To cancel
cannot be used.				BASS ON
• When input signal is Dolby digital stereo or DTS stereo, this mode		BASS						Press [BASS SYNTHESIZER].
		SYNTHESIZER
Multi-source re-master
This original feature boosts the frequencies of the higher harmonics that
are lost during recording due to compression.
When re-master is on, the current level appears.
EFFECT 2: For tracks with a variety of tempos (jazz)				EFFECT 1
EFFECT 1: For fast tracks (pop and rock)		MULTI-SOURCE
		RE-MASTER
EFFECT 3: For slow tracks (classical)
			EFFECT 1, EFFECT 2, EFFECT 3,
EFFECT 4: For compressed audio signals				EFFECT 4, OFF
OFF: The re-master processing is off.
Subwoofer level
You can adjust the volume of the subwoofer while listening to a source.
Select SW – – – to stop output.
The factory setting is SW 10.		SUBWOOFER
• You cannot adjust the subwoofer level if DVD ANALOG 6CH is				SW	10
selected.
• Sound can be distorted if you raise the volume while the subwoofer
			---, MIN, 5, 10, 15, MAX
level is high. Reduce the subwoofer level if this occurs.
Center focus
You can make the sound of the center speaker seem like it is coming		CENTER
from within the television.								• To cancel
		FOCUS
				C.FOCUS
The center focus cannot be used in the following cases:								Press [CENTER FOCUS].
• When there is no center input signal.
• When the center speaker is not selected in the SPEAKERS settings.
Multi rear surround
This mode makes it seem like sound is coming from the multiple rear
surround speakers virtually when connected with surround speakers.		MULTI
The multi rear surround cannot be used in the following cases:								• To cancel
		REAR
				M.REAR
• When there is no surround input signal.								Press [MULTI REAR].
• When the surround channel is monaural.
• When the surround speaker is not selected in the SPEAKERS
settings.
DTS FIX mode	While the input source is selected
In rare cases, the unit may have trouble recognizing the digital signals
		6.1CH DECODING		TUNE 1				DTS FIX
on discs.
With DTS, the signals may not be recognized at all. Engage the DTS
	Press and hold at the same					• To cancel, perform the same
FIX mode if this occurs.	time for 2 seconds.						operation again.
When DTS FIX mode is on, the unit cannot process other signals. This
							“AUTO” is displayed.
may cause noise to be output. Turn the setting off in this case.
• When you turn the unit to standby, the DTS FIX mode is canceled.

Operations

For your reference

The bass synthesizer, center focus or multi rear surround cannot be used in the following cases.

•When input signal is monaural, DTS 96/24, PCM with sampling frequencies of 192, 176.4, 96 or 88.2 kHz.

•When Dolby Pro Logic Ⅱ , DTS NEO:6, SFC or multi-source re-master is on.

The center focus or multi rear surround cannot be used in the following case.

•When input signal is PCM or analogue stereo.

•When DVD ANALOG 6CH is selected.

When DTS FIX mode is on

•You cannot use 6.1CH DECODING mode.

DTS-ES and DTS 96/24 are played as normal DTS (i.e., there is no output from the surround back speaker).

RQT7492

19