QuickSpecs
Compaq ProLiant ML330 Generation 2 (G2)
Storage
DRIVE SUPPORT (continued)
Maximum Storage Capacity - ATA Models (SCSI Attached (StorageWorks Enclosure))
| Internal | 320.0 | GB (4 x 80.0 GB) (ATA only) |
| External | 7.134 | TB (14 x 72.8 GB) x 7 (Requires additional SCSI controllers in slots) |
| Total | 7.454 | TB |
|
Maximum Storage Capacity - SCSI Models (SCSI Attached (StorageWorks Enclosure) + Optional Hot Plug Drive Cage) |
| Internal | 254.8 | GB ((3 x 36.4 GB non-hot-plug hard drives) + (2 x 72.8 GB hot plug hard drives)) |
| External | 7.134 | TB (14 x 72.8 GB) x 7 |
| Total | 7.389 | TB |
Tape Drives
Note: A SCSI controller needs to be purchased to operate internal or external SCSI devices in the ATA Models.
Note: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://www5.compaq.com/products/quickspecs/North_America/10233.html (North America) http://www5.compaq.com/products/quickspecs/Division/10233.html (Division/World Wide)
Internal AIT 35-GB IDE Tape Drive | Up to 2 | C, D | Integrated IDE |
| | | |
Internal 12/24-GB DAT Drive | Up to 2 | C, D | 64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter |
| | | 64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter |
20/40-GB DDS-4 Tape Drive | Up to 2 | C, D | 64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter |
| | | 64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter |
AIT 100-GB, Internal | Up to 2 | C, D | 64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter |
AIT 50-GB Internal | | | 64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter |
AIT 35-GB, LVD Internal | | | |
AIT 100-GB, External | Up to 2 | External | 64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter |
AIT 50-GB External | | | 64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter |
AIT 35-GB, LVD External | | | |
DA-10961 | World Wide — Version 18 — June 27, 2002 | 27 |
