Compaq 99875320-5 manual Features and Specifications

Page 9

SECTION 1. FEATURES AND SPECIFICATIONS

The USB (Universal Serial Bus) HID (Human Interface Device) IntelliHead Swipe Reader is a compact magnetic stripe card reader that conforms to ISO standards. The Reader is compatible with any device with a USB host interface. A card is read by sliding it past the head either forward or backward.

The Reader conforms to the USB HID Class specification Version 1.1. This allows host applications designed for most versions of Windows to easily communicate to the device using standard Windows API calls that communicate to the device through the HID driver that comes with Windows.

Unlike HID keyboard emulation readers, this device does not use keyboard emulation. It behaves like a vendor-defined HID device so that a direct communication path can be established between the Host application and the device without interference such as keystrokes from other HID devices. (For information on the USB KB Emulation IntelliHead, refer to Technical Manual 99875321.)

FEATURES

Major features of the USB IntelliHead are as follows:

•Powered through the USB – no external power supply required

•Hardware Compatible with PC or any computer or terminal with a USB interface

•Bi-directional card reading

•Reads encoded data that meets ANSI/ISO/AAMVA/JIS Type 2 standards and others such as ISO track 1 format on track 2 or 3

•Reads up to three tracks of card data

•Compatible with USB specification Revision 1.1

•Compatible with HID specification Version 1.1

•Can use standard Windows HID driver for communications. No third part device driver is required.

•Programmable USB serial number descriptor

•Programmable USB Interrupt In Endpoint polling interval

•Non-volatile memory for configuration storage

•Ability to convert to Keyboard Emulation mode of operation

1

Page 8 Page 10
Image 9
Page 8 Page 10
Contents October Registered to ISO USB HID IntelliheadPage Rev Number Date RevisionsLimitation on Liability Limited WarrantyFCC Warning Statement FCC Compliance Statement Table of Contents Vii USB IntelliHead 3-Track Features Features and SpecificationsAccessories Hardware ConfigurationsReference Documents USB HID IntelliHead Swipe ReaderFeatures and Specifications SpecificationsUSB HID IntelliHead Swipe Reader Windows Plug and Play Setup InstallationPin Number Signal Cable Color USB ConnectionUSB HID IntelliHead Swipe Reader Card Read OperationUSB HID IntelliHead Swipe Reader HID Usages USB CommunicationsUsage ID Usage Name Hex Type Report DescriptorReport Type ValueTrack 1 Decode Status Card DataUSB Communications Value Hex Offset Usage NameTrack 3 Decode Status Track 2 Decode StatusTrack 1 Data Length Track 2 Data LengthTrack Data Card Encode TypeTrack 1 Data Track 2 DataCommand Number CommandsData Length DataResult Code GET and SET Property CommandsValue Property ID Description Hex Softwareid PropertyProperty Type Description Cmd Num Data Len Prp IDCmd Num Data Len Prp ID Prp Value 31 32 Serialnum PropertyResult Code Data Len Result Code Data Len Prp Value 31 32Pollinginterval Property Cmd Num Data Len Prp ID Prp ValueResult Code Data Len Prp Value Maxpacketsize Property Trackidenable Property Interfacetype Property Decodeenable Property Cmd Num Data Len Resetdevice CommandUSB HID IntelliHead Swipe Reader Installation Demo ProgramOperation Source Code Part Number Title Appendix A. DrawingsUSB HID IntelliHead Swipe Reader Appendix A. Drawings USB HID IntelliHead Swipe Reader Appendix A. Drawings USB HID IntelliHead Swipe Reader Appendix A. Drawings USB HID IntelliHead Swipe Reader Appendix A. Drawings USB HID IntelliHead Swipe Reader
Top Page Image Contents