Visual Manager User Interface
SCSI module bus settings:
•Primary Initiator
•Alternate Initiator
CAUTION: If this configuration setting is incorrectly set, processing difficulties may occur. Before changing this setting, evaluate the need for the change and verify the desired setting. Compaq recommends backing up the router configuration to an external file before making changes to this setting.
•Target
CAUTION: If this configuration setting is incorrectly set, processing difficulties may occur. Before changing this setting, evaluate the need for the change and verify the desired setting. Compaq recommends backing up the router configuration to an external file before making changes to this setting.
NOTE: Target IDs must be setup prior to mapping devices on the SCSI bus.
NOTE: Do not enable Target IDs unless there is a SCSI initiator on the bus that wants to use Fibre Channel devices. This type of configuration is known as a Target Mode configuration.
•Discovery—toggles between Enabled and Disabled.
•Discovery
NOTE: Compaq recommends setting the value to at least 2 seconds to ensure all SCSI devices complete their individual
•Bus Reset on Boot—toggles between Enabled and Disabled.
When enabled, the router will automatically reset SCSI buses during a power up or reboot of the router.
StorageWorks by Compaq Network Storage Router M2402 User Guide |