Compaq M2402 manual Fibre Channel and Scsi Common Mapping Tasks

Visual Manager User Interface

To view or change map settings of a specific module:

1.Select one of the module and port/bus from the menu bar on the left side of the screen or from the router image at the top of the screen.

2.After a Fibre Channel port or SCSI bus has been selected, specific mapping information is displayed, including the name of the port, the selected host, and the assigned map.

3.To make changes to the configuration, enter the new value and then click Submit.

Because many mapping configuration settings are common to Fibre Channel and SCSI maps, this section is subdivided as follows:

•Fibre Channel and SCSI Common Mapping Tasks

•Fibre Channel Mapping Tasks

•SCSI Mapping Tasks

Fibre Channel and SCSI Common Mapping Tasks

The following action options are available for Fibre Channel and SCSI maps:

•Add Host—adds a new host.

To add an undefined host, type the hostname in the Add Host field and then click Add.

•Add Map—adds a new map.

To add an undefined map, type the name of the map in the Add Map field and then click Add.

•Select Host—adds a known host.

To select a previously set up host, expand the Select Host drop-down box and select the host from the list.

•Select Map—adds a known map.

To select a previously set up map, expand the Select Map drop-down box and select the map from this list.

4-40 StorageWorks by Compaq Network Storage Router M2402 User Guide