Chauvet DMX5M, DMX5F user manual Setup, Fuse Replacement, Mounting, Ri Ent At I O N, Rigging

Page 12

3.SETUP

Disconnect the power cord before replacing a fuse and always replace with the same type fuse.

Fuse Replacement

With a flat head screwdriver wedge the fuse holder out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power.

The fuse is located inside this compartment. Remove using a flat head screwdriver.

Mounting

O RI ENT AT I O N

This fixture may be mounted in any safe position, provided there is adequate room for ventilation.

RIGGING

It is important never to obstruct the fan or vents pathway. Mount the

fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the

fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs.

When selecting installation location, take into consideration access and routine maintenance.

Safety cables must always be used.

Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.

Hanging Clamp

Note!

Clamp is sold separately.

Scorpion™ Storm RGX User Manual

12

4/27/2009 5:13 PM

Image 12
Contents Snapshot Table of Contents What is included AC PowerBefore YOU Begin Unpacking InstructionsSafety Instructions NON-INTERLOCKED Housing Warning Stop and Read ALL Laser Safety DataLaser Safety Label Reproduction Laser Light Avoid Direct EYE Exposure Laser Emission DataFeatures IntroductionDMX Channel Summary Product Overview Product Dimensions Proper Usage Setup Fuse ReplacementMounting RI ENT AT I O NFixture Linking Data CablingDMX DAT a Cable Cable Connect ORSSetting up a DMX Serial Data Link PIN to 5- PIN Conversion ChartMaster/Slave Fixture Linking Operating Instructions Navigating the Control PanelMenu Functions Control Mode DMX Channel ValuesColor selection StrobeGeneral Troubleshooting Setting T HE ST Arting AddressReturns Procedure AppendixTechnical Support DMX PrimerClaims Technical Specifications