Christie Digital Systems 38-VIV401-01 Adjusting Screen, Zoom Adjustment, Focus Adjustment

Page 23

BASIC OPERATION

ADJUSTING SCREEN

ZOOM ADJUSTMENT

1

Press ZOOM /button on Side Control or on Remote Control

Unit. Message “Zoom” is displayed.

2

Press ZOOM button to make image larger, and press ZOOM

 

button to make image smaller.

Zoom

Message disappears after 4 seconds.

FOCUS ADJUSTMENT

1

Press FOCUS /button on Side Control or on Remote Control

Unit. Message “Focus” is displayed.

2

Adjust focus of image by pressing FOCUS /button(s) .

Focus

Message disappears after 4 seconds.

LENS SHIFT ADJUSTMENT

1

Press the LENS SHIFT button on Side Control or on the Remote

Control Unit. Message “Lens shift” is displayed.

2

Press POINT UP button to move image up, press POINT DOWN

button to move image down, press POINT LEFT to move image

left and press POINT RIGHT to move image right.

Lens shift

Message disappears after 4 seconds.

KEYSTONE ADJUSTMENT

If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.

1

Press KEYSTONE /button on Remote Control Unit or select

Keystone on SETTING menu. (Refer to page 40.) Keystone

 

dialog box appears.

2

Correct keystone distortion by pressing KEYSTONE /button

or POINT UP/DOWN button(s). Press KEYSTONE button or

POINT UP button to reduce upper part of image, and press KEYSTONE button or POINT DOWN button to reduce lower part.

Reduce upper width with KEY STONE button or POINT UP button.

Reduce lower width with KEY STONE button or POINT DOWN button.

23

Image 23
Contents Model Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compatibility Features and DesignName of Each Part of Projector PreparationFor U.S.A. and Canada For Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Positioning Projector Preparation Lens InstallationLens Shift Adjustment Moving Projector Preparation Picture Level and Tilt AdjustmentTerminals of Projector Connecting ProjectorReplacement of Terminal AV Input VIDEO/Y, C Jacks Connecting Projector INPUT/OUTPUT Terminals and Jacks InputBNC Input Jacks Audio Input JacksJack Reset ButtonSerial Port Terminal Serial Port OUT TerminalTerminals Projector Connecting to ComputerTerminals Connecting to Video EquipmentSide Controls Side Controls and IndicatorsBefore Operation Lamp Replace Indicator IndicatorsReady Indicator Lamp IndicatorLaser Pointer Function Operation of Remote ControlFocus Button Volume ButtonWired Remote Jack Zoom ButtonFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Turning OFF Projector Basic OperationTurning on / OFF Projector Turning on ProjectorKeystone Adjustment Adjusting ScreenZoom Adjustment Focus AdjustmentNo Show Function Timer FunctionBasic Operation Picture Freeze Function Sound Menu Sound AdjustmentDirect Operation Menu OperationInput Computer InputSelecting Input Source Selecting Computer SystemPC System Menu Computer Input Automatic MULTI-SCAN SystemSelect Computer System Manually AutoResolution Computer Input Compatible Computer SpecificationsComputer Input PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image 1~4 Picture Image AdjustmentImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Input When Select Input 2 5 BNC SlotPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System Video InputCinema Noise reduction Video Input Image Level AdjustmentColor TintProvides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitUSB Wireless Mouse modeProjector mode Lamp counter resetOperating Wireless Mouse Operating Wireless MouseMaintenance InstallationCleaning Projection Lens Appendix AIR Filter Care and CleaningYellow Lamp Dim Lamp Red Lamp Mark on Lamp Appendix Lamp ManagementOrder Replacement Lamp Appendix Lamp ReplacementTroubleshooting Service Technical Specifications DVI-I Terminal DIGITAL/ANALOG Appendix Configurations of TerminalsSerial Port IN/OUT Terminal Part No 296 8828 1AA6P1P3040-- MJ6K