CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.
| AUDIO INPUT JACKS | VIDEO INPUT JACKS | |||
Connect the | Connect the audio output | Connect the composite video | |||
output from video | from video equipment to | output from video equipment | |||
equipment to | this | these jacks. |
| to VIDEO/Y jack or connect | |
jack. (Refer to P13.) | (Refer to P13.) |
| the component video outputs | ||
|
| ● When the audio output | to VIDEO/Y, Pb/Cb and | ||
|
|
| is monaural, connect it | Pr/Cr jacks. (Refer to P13.) | |
|
|
| to the L (MONO) jack. |
| |
COMPUTER IN |
| VIDEO |
|
| |
DIGITAL | R – AUDIO IN – L (MONO) Y – | Pb / Cb – Pr / Cr |
| ||
| S – VIDEO | AUDIO IN | R – AUDIO OUT – L | ||
|
|
| COMPUTER |
| RESET |
MCI |
|
|
|
|
|
|
|
| COMPUTER IN | USB | CONTROL PORT |
|
|
| ANALOG | ||
|
|
|
|
| |
AUDIO OUTPUT JACKS
Connect an external audio amplifier to these jacks.
(Refer to P12, 13.)
RESET BUTTON
This projector uses a micro processor to control this unit, and occasionally this micro processor may malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use
the RESET function excessively.
CONTROL PORT CONNECTOR
When controlling the computer with Remote Control Unit of this projector, connect the mouse port of your personal computer to this connector. (Refer to P12.)
COMPUTER INPUT
TERMINALS (DIGITAL/ANALOG)
Connect the computer (digital/analog) output to one of these terminals.
(Refer to P12.)
COMPUTER AUDIO
INPUT JACK
Connect the audio output
(stereo) from the computer to this jack. (Refer to P12.)
USB CONNECTOR (Series B)
When controlling the computer with the Remote Control Unit of the projector, connect USB port of your personal computer to this connector. (Refer to P12.)
11