BEFORE OPERATION
ZOOM BUTTON
Operating Range
Point Remote Control Unit toward projector (Receiver Window)
Used to adjust zoom. |
|
|
(P23) | ZOOM | FOCUS VOLUME |
| LOCK |
|
FOCUS BUTTON | MUTE | D.ZOOM INPUT 1/2 |
Used to adjust focus. |
|
|
(P23) | MENU | INPUT 3/4 |
|
MUTE BUTTON
Used to mute sound.(P25)
VOLUME BUTTON
Used to adjust volume. (P25)
D.ZOOM BUTTON
Used to select DIGITAL ZOOM +/– mode and resize image. (P34)
LENS SHIFT BUTTON
Used to select LENS SHIFT function. (P23)
whenever pressing any button. Maximum operating range for Remote Control Unit is about 16.4’ (5m) and 60° in front and rear of a projector.
60°
16.4’ (5 m)
NO SHOW BUTTON
Used to turn picture into black image. (P24)
AUTO PC ADJ. BUTTON
Use to operate AUTO PC Adjustment function. (P29)
LASER |
|
LENS SHIFT | |
KEYSTONE | |
NO SHOW | FREEZE |
AUTO PC ADJ. | IMAGE |
| |
FREEZE BUTTON
Used to freeze picture. (P24)
IMAGE BUTTON
Used to select image level. (P32, 37)
KEYSTONE BUTTON
16.4’
WIRED REMOTE JACK
When using as Wired
Remote Control, connect Remote Control Cable to
this jack.
Battery installation is required when using as Wired Remote Control.
Used to correct keystone distortion. (P23, 40)
(5 m)
60°
Remote Control Batteries Installation
1 | Remove battery |
compartment lid. |
Press lid down- ward and slide it.
2 | Slide batteries into | 3 Replace compartment lid. |
compartment. |
Two AA size batteries
For correct polarity (+ and
with pins in compartment.
To insure safe operation, please observe following precautions :
●Use (2) AA, UM3 or R06 type alkaline batteries.
●Replace two batteries at same time.
●Do not use a new battery with an used battery.
●Avoid contact with water or liquid.
●Do not expose Remote Control Unit to moisture, or heat.
●Do not drop Remote Control Unit.
●If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries.
●Danger of explosion if battery is incorrectly replaced.
●Dispose of used batteries according to the batteries manufacturers instructions and local rules.
19