COMPUTER INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display desirable image size.
1 | Press MENU button and |
| POINT LEFT/RIGHT button(s) to move a red frame pointer to |
| SCREEN Menu icon. |
2 | Press POINT DOWN button and move a red frame pointer to |
function that you want to select and then press SELECT button. |
Normal
Provides image to fit screen size.
True
Provides image in its original size. When original image size is larger than screen size (1024 x 768), this projector enters “Digital zoom +” mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected,
A projected image can be also expanded by pressing D.ZOOM ▲ button on Remote Control Unit.
Digital Zoom –
When Digital zoom – is selected,
A projected image can be also compressed by pressing D.ZOOM ▼ button on Remote Control Unit.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM ▲/▼, SELECT, POINT and AUTO PC ADJ. buttons.
SCREEN MENU
SCREEN Menu icon
Move a red frame to function and press
SELECT button.
NOTE
●Picture screen adjustment can not be operated when “720p (HDTV)”, “1035i (HDTV)”, “1080i50 (HDTV)” or “1080i60 (HDTV)” is selected on PC SYSTEM Menu (P27).
●True and Digital zoom +/– can not be operated when “RGB”, “480p” or “575p” is selected on PC SYSTEM Menu (P27).
●This projector can not display any resolution higher than 1600 X 1200. If your computer’s screen resolution is higher than 1600 X 1200, reset resolution to lower before connecting projector.
●Image data in other than XGA (1024 x 768) is modified to fit screen size in initial mode.
●Panning function may not operate properly if computer system prepared on PC ADJUST Menu is used.
34