CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 12 to 14 and connect properly.
COMPUTER AUDIO
INPUT 1/AUDIO MONITOR
OUTPUT JACK
This terminal is switchable and can be used as computer audio input 1 or audio monitor output (variable).
Set the terminal up as either Computer audio input 1 or Audio Monitor output properly before using this terminal.
COMPUTER INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
This terminal is switchable and can be used as computer input or monitor output. Set the terminal up as either Computer input or Monitor output properly before using this terminal.
Refer to P13, P23.)
Note; This terminal outputs from 5 BNC type computer input on
COMPUTER INPUT
TERMINAL (DIGITAL)
Connect computer output (Digital DVI-D type) to this terminal.
HD (HDCP Compatible) signal can also be connected.
Refer to P13.)
COMPUTER AUDIO
INPUT 2 JACK
Connect an audio output (stereo) from computer to this jack.
(Refer to P13.)
Refer to P13, P23.)
INPUT 2 jacks only.
R/C JACK
USB CONNECTOR (Series B)
When controlling computer with Remote Control Unit of this projector, connect USB terminal of your personal computer to this terminal. (Refer to P13.)
RESET BUTTON
This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET function excessively.
INPUT 1
ANALOG IN/OUT |
R/C JACK
AUDIO 1 | USB | RESET | CONTROL PORT | ||
IN/OUT |
|
| AUDIO 2 |
| |
G | B |
| R | H/V | V |
VIDEO/Y | Cb/Pb |
| Cr/Pr |
|
|
|
|
| INPUT 2 |
|
|
VIDEO/Y Cb/Pb Cr/Pr | |||||
| |||||
|
|
|
| (MONO) |
|
|
|
| INPUT 3 |
|
|
When using Wired/Wireless Remote Control Unit as Wired Remote Control, Connect Wired Remote Control Unit to this jack with Remote Control Cable (supplied).
CONTROL PORT CONNECTOR
When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to this connector. (Refer to P13.)
5 BNC INPUT JACKS
Connect component video output (Y, Cb, Cr or Y, Pb, Pr) from video equipment to VIDEO/Y, Cb/Pb and Cr/Pr jacks or connect computer output {5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)} from computer to G, B, R, H/V and V jacks. (Refer to P13 and 14.)
VIDEO INPUT JACKS |
| AUDIO INPUT JACKS |
| |
Connect composite video | Connect an audio output |
| Connect | |
output from video equipment | from video equipment to |
| output from video | |
to VIDEO/Y jack or connect | these jacks. |
| equipment to this | |
component video outputs to | (Refer to P14.) |
| jack. (Refer to P14.) | |
VIDEO/Y, Cb/Pb and Cr/Pr |
|
|
| |
jacks. (Refer to P14.) |
|
|
| |
12