BASIC OPERATION
ADJUSTING SCREEN
| ZOOM ADJUSTMENT | ||
1 | Press ZOOM ▲/▼ button on Top Control or on Remote Control |
|
|
| |||
Unit. Message “Zoom” is displayed. |
|
| |
2 | Press ZOOM ▲ button to make image larger, and press ZOOM |
|
|
| ▼ button to make image smaller. |
|
|
|
|
|
|
Zoom
Message disappears after 4 seconds.
FOCUS ADJUSTMENT
1 | Press FOCUS ▲/▼ button on Top Control or on Remote Control |
Unit. Message “Focus” is displayed. | |
2 | Adjust focus of image by pressing FOCUS ▲/▼ button(s) . |
Focus
Message disappears after 4 seconds.
LENS SHIFT ADJUSTMENT
1 | Press LENS SHIFT button on Top Control or on Remote Control |
Unit. Message “Lens shift” is displayed. | |
2 | Press POINT UP button to move image up, press POINT DOWN |
button to move image down. |
�
Lens shift
�
Message disappears after 4 seconds.
�
KEYSTONE ADJUSTMENT
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
1 | Press KEYSTONE ▲/▼ |
Keystone on SETTING |
dialog box appears.
button on Remote Control Unit or select menu. (Refer to page 39.) Keystone
2 | Correct keystone distortion by pressing KEYSTONE ▲/▼ button |
or POINT UP/DOWN button(s). Press KEYSTONE ▲ button or |
POINT UP button to reduce upper part of image, and press KEYSTONE ▼ button or POINT DOWN button to reduce lower part.
Reduce upper width with KEYSTONE ▲ button or POINT UP button.
Reduce lower width with KEYSTONE ▼ button or POINT DOWN button.
22