Christie Digital Systems HD Series manual HD2Kc, HD3K, HD5K c, HD6K

5 T E C H N I C A L S P E C I F I C A T I O N S

Image brightness

contrast uniformity Display type

native resolution Lamp type life Input

signal compatibility

pixel clock scan rates

Inputs, control and networking

Optical system

Lens options fixed zoom offsets

Accessories standard optional

Enhanced feature sets

Power requirements operating voltage operating current power dissipation Dimensions size volume weight

shipping weight Operating environment Regulatory approvals

Limited warranty

	HD2Kc		HD3K		HD5Kc		HD6K
•	2300 ANSI lumens @ 500W	•	2900 ANSI lumens @ 500W	•	5000 ANSI lumens @ 200 VAC	•	6500 ANSI lumens @ 200 VAC
	[2550 center lumens]		[3200 center lumens]		[5500 center lumens]		[7100 center lumens]
•	1600 ANSI lumens @ 350W	•	2030 ANSI lumens @ 350W	•	3850 ANSI lumens @ 110 VAC	•	5000 ANSI lumens @ 110 VAC
	[1785 center lumens]		[2240 center lumens]		[4250 center lumens]		[5500 center lumens]

•1600-2000:1 (full on/off) • 400:1 min ANSI

•90% brightness

•3-chip 0.95" DMD

•HD (1920 x 1080)

• 500W CERMAX® Xenon pre-aligned lamp module	• 1kW CERMAX® Xenon pre-aligned lamp module
• Up to 2500 hours @ 500W • Up to 4000 hours @ 350W	• 1500 hours (typical) lifetime

•HDTV formats VGA through to QXGA (2048 x 1536) • Accepts all current HDTV/DTV formats

•Multi-standard video decoder • Horizontal and vertical scaling, all inputs

•210 MHz

•15 kHz to 120 kHz Horizontal • 23.97 Hz to 150 Hz Vertical

• RGBHV/YPbPr via 5 BNC • DVI-I – digital/analog RGB/YPbPr (HDCP) • One composite video, one S-video

•Two optional slots for analog/digital modules • 2 RS-232 ports, 1 GPIO port, 1 RS-422 port

•On-board ChristieNET™ connectivity (RJ45) • Built-in backlit keypad and IR remote control

• Dust sealed, 3-chip DMD light engine • Motorized horizontal and vertical lens offset • Scheimpflug (tilt) adjustment

•Built-in light shutter • Tool-free lens insertion system

•0.67:1*, 1.1:1

•1.16-1.49:1, 1.4-1.8:1, 1.8-2.6:1, 2.6-4.1:1, 4.1-6.9:1, 6.9-10.4:1

• ±120% Vertical • ±42% Horizontal • (* ±50%V ±20%H)

• IR keypad (w/batteries) • Line cord • User manual • Input modules – Dual SD/HD-SDI, DVI

•Christie Twist™ image warping and edge-blending module • Input modules Dual SD/HD-SDI, DVI and legacy interface modules

• Wired remote control and RS-422 • Remote IR sensor • Ethernet, RS-232, RS-422 cables • Service manual • KoRE™ 10-bit librarian

• Lens adapter (can be used with competitors lenses) • Stacker • and more (see accessories brochure)

• LiteLOC™ • Film-like color reproduction with Kc models • Comprehensive Color Adjustment (CCA™)

•User replaceable bulb in Roadster models • Intelligent Lens System (ILS™) for zoom and focus on the zoom lenses

• Built-in edge blending • Menus in five languages • 50 channel memories • Auto setup • Digital keystone correction

•100 VAC to 240 VAC ± @ 50/60 Hz

• 10A @ 100 VAC / 5A @ 200 VAC	• 10.4A @ 100 VAC / 8A @ 200 VAC
• 879W maximum	• 1600W maximum
• 3000 BTU/hr	• 5460 BTU/hr

•(LxWxH): 22.3 x 26.0 x 12.32" (566 x 660 x 313mm)

•7132 in3 (116,924 cm3)

•	72 lb (32.1 kg)	• 75 lb (34 kg)
•	115 lb (52 kg)	• 120 lb (54.4 kg)

•Temperature: 40 to 95º F (5 to 35º C) • Humidity: 20-80% non-condensing

This product conforms to the following regulations related to product safety, environmental requirements and electromagnetic compatibility (EMC):

•FCC Part 15, Subpart B Class A; CISPR22/EN55022; CISPR24/EN55024 • UL 60950-1 First edition; CAN/CSA-C22.2 No 60950-1-03 First edition;

•IEC60950-1:2001 • 2002/95/EC RoHS

•2 years parts and labor (including light engine) • Contact an authorized Christie representative for full details of our limited warranty