Onkyo RDA-7.1 instruction manual Front panel facilities, Power Off On/Standby

Page 9

Front panel facilities

Power

On Off

On

Standby

Seven Channel Amplifier RDA-7.1

Power

On /

Off

On/Standby

Pressing this switch connects the RDA-7.1 to the main Power outlet and the On indicator lights blue. Sound will be heard after approximately 9 seconds. If you want to operate the RDA-7.1 using a 12-volt trigger, connect to the 12V TRIGGER OUT terminal of AV controller or pre amplifier to the 12V TRIGGER IN terminal of the RDA- 7.1, and leave the Power switch of the RDA-7.1 set to On.

For example, to control the RDA-7.1 while it is connected to the RDC-7.1 AV controller, connect the 12V TRIGGER OUT E jack of the RDC-7.1 to the 12V TRIGGER IN jack of the RDA-7.1 with the supplied stereo mini-plug cable.

If a plug is connected to the 12V TRIGGER IN jack:

The signal reaches the 12V TRIGGER, the On indicator lights blue. When there is no signal at the 12V TRIGGER, the Standby indicator lights red.

The RDA-7.1 is equipped with two indicators to display its status. If both indicators are off, then the main Power switch on the front panel is turned off. If the Power switch is turned on, then one of these indicators will be lit.

On: Lights blue when Power is supplied from the AC mains Power supply, or signal is input from the 12V TRIGGER IN terminal.

Standby: Lights red when no signal is input from the 12V TRIGGER IN terminal and the RDA-7.1 is in the Standby state.

Note:

If the Power switch is pressed and neither indicator lights, check that the Power cord is properly connected and that a fuse has not blown. If the indictors still do not light, turn off the RDA-7.1, disconnect the Power cord, and contact an Onkyo service station or representative.

If the On indicator lights blue and the Standby indicator flashes red, the protection circuitry of the RDA-7.1 has activated. The protection circuitry activates if a problem such as a speaker cable shorting or the temperature of the RDA-7.1 rising excessively occurs. Turn off the RDA- 7.1, remove the cause of the problem, and then turn the RDA-7.1 back on. If the problem is still not solved, turn off the RDA-7.1, disconnect the power cord, and contact an Onkyo service station or representative.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RDA-7.1 Avis Important Safety InstructionsFeaturesContents For British model PrecautionsPower Power cordWarranty Claim AC fuseUnpacking Supplied accessoriesRemoving the RDA-7.1 Storing the packing materialsInstallation location and space InstallationQuick operation guide Front panel facilities Power Off On/StandbyRear panel facilities and connections Precaution for connectionBalanced Input XLR terminal Unbalanced Input single end RCA input+ Output Speaker output Binding post FuseGround Phasing your speaker system Speaker ratings Connecting speakersBalanced input/output connection RDC-7.1 Connecting to the RDC-7.1RDA-7.1 Unbalanced input/output connection RCA type cableAn input cable is causing the hum Your cable television system wiring may be causing the humImproper grounding in your home is causing the hum AC ground terminal loopNo power Troubleshooting guide SpecificationsPower turns on but no sound Standby indicator flashes3 4 3 6 3

RDA-7.1 specifications

The Onkyo RDA-7.1 is a high-performance AV receiver designed to elevate your home entertainment experience. This unit stands out in the crowded market of audio-video receivers, offering a blend of advanced technology, quality construction, and user-friendly features.

One of the primary highlights of the RDA-7.1 is its 7.1 channel surround sound capability. This allows users to immerse themselves in a true cinematic audio experience, whether they're watching movies, playing video games, or listening to music. The receiver boasts a robust output power rating, delivering clear and dynamic audio that fills the entire room.

The Onkyo RDA-7.1 supports a variety of audio formats, including Dolby Atmos and DTS:X, which provide three-dimensional soundscapes by adding height channels to traditional surround sound setups. This feature significantly enhances the realism of audio playback, making you feel as if you are part of the action.

Connectivity is another area where the RDA-7.1 excels. It comes equipped with multiple HDMI inputs, allowing for seamless integration with a range of devices, including Blu-ray players, gaming consoles, and streaming devices. The receiver also supports 4K video pass-through and HDR, ensuring that your visual experience is just as impressive as the audio.

In terms of user interface, the RDA-7.1 offers an intuitive on-screen display that simplifies the setup process. It also includes an auto calibration feature that optimally adjusts the audio output based on your room's acoustics, making installation straightforward and hassle-free.

Additionally, the RDA-7.1 is designed with music lovers in mind. It features a high-quality DAC (Digital-to-Analog Converter) that enhances audio fidelity. This ensures that whether you're streaming music from your favorite service or playing back your carefully curated collection, you can expect superb sound quality.

With durable construction and a sleek design, the Onkyo RDA-7.1 fits seamlessly into any home theater setup. Its combination of powerful audio performance, advanced surround sound technologies, extensive connectivity options, and user-friendly features make it a prime candidate for anyone looking to enhance their home entertainment system.
Top Page Image Contents