Onkyo RDA-7.1 Troubleshooting guide Specifications, No power, Power turns on but no sound

Page 15

Troubleshooting guide

 

Specifications

If the RDA-7.1 fails to function normally, first check the following points before contacting your Integra Research dealer. If the problem is not solved after going through the following list, unplug the power cord and contact your Integra/Onkyo authorized service center.

POWER

No power.

•Power cord is not correctly plugged into AC outlet/ Inlet.

➞Plug the power cord into the AC outlet/Inlet properly.

•Power switch is not set to ON position.

➞Set the power switch to ON.

Power turns on but no sound.

•Incomplete connections.

➞Check speaker cable connections.

➞Insert all plugs firmly into jacks.

•No input signal from AV controller.

➞Check for input signal from AV controller.

•Incorrect INPUT SELECT switch setting.

➞Set INPUT SELECT switch to correct setting.

The Standby indicator flashes.

•Protective circuitry activated.

➞A problem such as a speaker cable shorting or the temperature of the RDA-7.1 rising excessively may have occurred. Turn power off immediately, locate problem, and correct it.

AMPLIFIER SECTION

 

Number of channels:

7

Power:

 

150 watts per channel min. RMS at 8 ohms, 2 channels driven from 20 Hz to 20 kHz with no more than 0.1 % total harmonic distortion (FTC).

300 watts per channel min. RMS at 4 ohms, 2 channels driven at 1 kHz with no more than 0.1 % total harmonic distortion (FTC).

350 W (EIAJ, 4 Ω, 1 kHz, 10 %)

300 W (DIN, 4 Ω, 1 kHz, 0.7 %)

Frequency response at –3 dB:

3.5 Hz - 250 kHz

Input Impedance:

47 kohm each phase

Input signal for max output power:

1.2 V

Input Sensitivity (Unbalanced):

100 mVrms

Input Sensitivity (Balanced):

200 mV

THD:

0.03 % (20 Hz to 20 kHz)

Damping Factor:

40 at 8 ohm

Power consumption

 

USA, Canada and some Asian model:

 

15 A

Other models:

10 A

Rated Speaker Impedance:

4 ohms

GENERAL

 

Power Supply:

AC 120 V, 60 Hz

 

AC 230 V, 50 Hz

 

AC 220 V, 50/60 Hz

Dimensions (W ⋅ H ⋅ D):

450 ⋅ 197 ⋅ 602 mm

 

17-11/16" ⋅ 7-3/4"

 

⋅ 23-11/16"

Weight:

52.5 kg, 115.7 lbs.

Specifications and features are subject to change without notice.

Power supply and voltage vary depending on the area in which the unit is purchased.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents RDA-7.1 Avis Important Safety InstructionsFeaturesContents For British model PrecautionsAC fuse Power cordPower Warranty ClaimStoring the packing materials Supplied accessoriesUnpacking Removing the RDA-7.1Installation location and space InstallationQuick operation guide Front panel facilities Power Off On/StandbyUnbalanced Input single end RCA input Precaution for connectionRear panel facilities and connections Balanced Input XLR terminal+ Output Speaker output Binding post FuseGround Phasing your speaker system Speaker ratings Connecting speakersUnbalanced input/output connection RCA type cable Connecting to the RDC-7.1Balanced input/output connection RDC-7.1 RDA-7.1AC ground terminal loop Your cable television system wiring may be causing the humAn input cable is causing the hum Improper grounding in your home is causing the humStandby indicator flashes Troubleshooting guide SpecificationsNo power Power turns on but no sound3 4 3 6 3

RDA-7.1 specifications

The Onkyo RDA-7.1 is a high-performance AV receiver designed to elevate your home entertainment experience. This unit stands out in the crowded market of audio-video receivers, offering a blend of advanced technology, quality construction, and user-friendly features.

One of the primary highlights of the RDA-7.1 is its 7.1 channel surround sound capability. This allows users to immerse themselves in a true cinematic audio experience, whether they're watching movies, playing video games, or listening to music. The receiver boasts a robust output power rating, delivering clear and dynamic audio that fills the entire room.

The Onkyo RDA-7.1 supports a variety of audio formats, including Dolby Atmos and DTS:X, which provide three-dimensional soundscapes by adding height channels to traditional surround sound setups. This feature significantly enhances the realism of audio playback, making you feel as if you are part of the action.

Connectivity is another area where the RDA-7.1 excels. It comes equipped with multiple HDMI inputs, allowing for seamless integration with a range of devices, including Blu-ray players, gaming consoles, and streaming devices. The receiver also supports 4K video pass-through and HDR, ensuring that your visual experience is just as impressive as the audio.

In terms of user interface, the RDA-7.1 offers an intuitive on-screen display that simplifies the setup process. It also includes an auto calibration feature that optimally adjusts the audio output based on your room's acoustics, making installation straightforward and hassle-free.

Additionally, the RDA-7.1 is designed with music lovers in mind. It features a high-quality DAC (Digital-to-Analog Converter) that enhances audio fidelity. This ensures that whether you're streaming music from your favorite service or playing back your carefully curated collection, you can expect superb sound quality.

With durable construction and a sleek design, the Onkyo RDA-7.1 fits seamlessly into any home theater setup. Its combination of powerful audio performance, advanced surround sound technologies, extensive connectivity options, and user-friendly features make it a prime candidate for anyone looking to enhance their home entertainment system.
Top Page Image Contents