Appendix
Specifications
Rated output Power | : North America |
|
| |
| 40 watts minimum continuous power per channel, 8 ohm loads, 2 | |||
| channels driven at 1 kHz, with a maximum total harmonic | |||
| distortion of 0.8 % (FTC) |
| ||
| 100 watts minimum continuous power per channel, 2 ohm loads, 2 | |||
| channels driven at 1 kHz, with a maximum total harmonic | |||
| distortion of 0.8 % (FTC) |
| ||
| Europe and Taiwan |
|
| |
| 40 W at 8 ohms, 2 ch driven, 1 kHz, 0.8 % THD (IEC) | |||
| 80 W at 4 ohms, 2 ch driven, 1 kHz,0.8 % THD (IEC) | |||
| China |
|
| |
| 35 W at 8 ohms, 2 ch driven, 1 kHz, 0.7 % THD (IEC) | |||
| 60 W at 4 ohms, 2 ch driven, 1 kHz, 0.7 % THD (IEC) | |||
Maximum Output Power | : China and Taiwan |
|
| |
| 90 W at 4 ohms, 1 kHz, 2 ch driven (JEITA) | |||
Dynamic Power | : 115 W (3 |
|
| |
| 90 W (4 |
|
| |
| 45 W (8 |
|
| |
THD (Total Harmonic Distortion) | : 0.08 % (1 kHz 1 W) |
|
| |
Damping Factor | : 60 (Front'1 kHz'8 |
|
| |
Input Sensitivity and Impedance | : 200 mV/33 k |
|
| |
| 2.4 mV/47 kHONO MM) |
|
| |
Output Level and Impeadance | : 200 mV/2.2 k |
|
| |
Phono Overload | : 60 mV (MM 1 kHz 0.5 %) |
|
| |
| 6.0 mV (MC 1 kHz 0.5 %) |
| ||
Frequency Response | : 5 | |||
Tone Control | : +14 dB, | |||
| +12 dB, | |||
| +0 dB, |
| ||
Signal to Noise Ratio | : 100 dB (LINE, |
|
| |
| 65 dB (PHONO, |
|
| |
Speaker Impedance | : North America and Taiwan |
| ||
| 2 | ( 16 B), 4 | ( 16 | |
| Others |
|
| |
| 4 | ( 16 B), 8 | ( 16 | |
Digital Inputs | : OPTICAL 1 (Rear), COAXIAL 1 (Rear) | |||
Analog Inputs | : PHONO/CD/TUNER/TAPE/DOCK | |||
Analog Outputs | : TAPE |
|
| |
Speaker Outputs | : 2 (A, B) |
|
| |
Phones | : 1 |
|
|
|
Power Supply | : North America and Taiwan | AC 120 V, 60 Hz | ||
| Others |
| AC | |
Power Consumption | : North America and Taiwan | 110 W | ||
| Others |
| 75 W | |
Dimensions (WxHxD) | : 435 x 80 x 340 mm |
|
| |
|
|
| ||
Weight | : 10.2 kg (22.5 lbs) |
|
|
Specifications and features are subject to change without notice.
18