Connecting to Other Devices—Continued
Connecting a Cassette or MiniDisc Recorder
Connect the audio outputs of the cassette or MiniDisc Recorder (PLAY) to the unit's TAPE IN jacks. Connect the audio inputs of the cassette or MiniDisc Recorder (REC) to the unit's TAPE OUT jacks.
A-5VL
LL
RR
REC PLAY (IN) (OUT)
Connecting an RI Dock
You can connect an Onkyo RI dock to the unit.
Connect the RI dock's AUDIO OUT to the unit's DOCK jack. Connect the RI dock and unit's jacks via the cable.
A-5VL
OUTPUT
(The drawing shows a
Set the RI dock's MODE selector to "HDD" or "HDD/DOCK".
Set the unit's input selector to "DOCK".
Notes
Refer to the RI dock's manual for details.
Connecting a Digital Playback
Component (OPTICAL)
Connect the component using a commercial optical digital cable.
Notes
-The unit supports 16/24 bit, 32/44.1/48/96 kHz PCM signal digital input.
-Inputting an incompatible signal may result in noise.
-When an unsupported signal is detected, the unit's LOCKED indicator illuminates.
-Do not input a
A-5VL
!Caution
Plug optical digital cables straight in and out. Plugging them in and out at an angle can damage the inlet of the OPTICAL terminal.
13