Ask Proxima C410/C420 manual Connecting a video device, Standard video connections

Connecting a video device

Standard video connections	connect A/V cable
Plug the audio/video (A/V) cable’s yellow connector into the video-out
connector on the video device. Plug the other yellow connector into the yel-
low Video 2 connector on the projector.
Plug a white connector into the left audio out connector on the video device
and plug a red connector into the right audio out connector on the video
device. Plug the remaining white connector into the left audio in connector
on the projector (to the right of the yellow Video 2 connector), and plug the
red connector into the right audio in connector on the projector.
Connect the black power cable to the connector on the back of the projector
and to your electrical outlet.	connect power cable
NOTE: Always use the power cable that shipped with the projector.
Optional video connections
If the video device uses a round, four-prong S-video connector, plug an	connect S-video and video cables
S-video cable (sold separately) into the S-video connector on the video
device and into the Video 1 connector on the projector. Use the A/V cable’s
audio connectors as described directly above (the yellow connectors on the
A/V cable are not used).

	audio in
	R		trigger
network mouse USB	computer 1	computer 2	monitor out
	L
	audio in	computer 3	serial control
	computer in

I

O

If the video device uses component cable connectors (sold separately), plug the cable’s green connectors into the green component-out connector on the video device and into the green component connector (labeled “Y”) on the projector. Plug the component cable’s blue connectors into the blue compo- nent-out connector on the video device and into the blue component con- nector (labeled “Pb”) on the projector. Plug the component cable’s red connectors into the red component-out connector on the video device and into the red component connector (labeled “Pr”) on the projector. If you are using RGB input, plug the additional connector into the Video 2/Synch con- nector and turn on the RGB Video option in the Sources menu. See page 33. To connect a progressive scan EdTV or HD component source, use the Com- ponent to VESA adapter to connect the source.

connect component cables and video cables

					trigger
network	mouse	USB	computer 1	computer 2	monitor out
				computer 3	serial control
				computer in

component to VESA adapter

13