Ask Proxima C410/C420 manual Important Operating Considerations for Safety

Page 6

Important Operating Considerations for Safety

Place the projector in a horizontal position no greater than 15 degrees off axis.

Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents.

Locate the projector at least 4' (1.2 m) away from any heating or cooling vents.

Use only InFocus-approved ceiling mounts.

Use only the power cord provided. A surge-protected power strip is recommended.

Refer to this manual for proper startup and shutdown procedures.

In the unlikely event of the lamp rupturing, discard any edible items placed in the surrounding area and thoroughly clean the area along all sides of the projector. Wash hands after cleaning the area and handling the ruptured lamp. This product has a lamp which contains a very small amount of mercury. Dispose of it as required by local, state or fed- eral ordinances and regulations. For more information see www.eiae.org.

Follow these instructions to help ensure image quality and lamp life over the life of the projector. Failure to follow these instructions may affect the warranty. For complete details of the warranty, see the Warranty section at the end of this user's guide.

Do not place objects in the areas along the side and in the front of the projector

2 ft (.6m)

2 ft (.6m)

 

2 ft (.6m)

5 ft (1.5m)

4

Image 6
Contents User’s Guide Page $GREH$FUREDWSGI Trademarks Remote Control WarningDeclaration of Conformity FCC WarningTable of Contents Important Operating Considerations for Safety Included items Projector components and featuresIntroduction Online RegistrationConnector Panel Wireless ProjectionConnecting a computer Required computer connectionsOptional computer connections Projector can be managed by ProjectorNet networking software Displaying a computer image ? No startup screen? Get help onFirst-time projector use with Windows Wizard launches two times For Windows 2000, Windows ME, and Windows XPAdjusting the image Connecting a video device Standard video connectionsOptional video connections Displaying a video image Adjust volume Troubleshooting your setup Shutting down the projectorLED behavior and meaning Screen Only startup screen appearsNo computer image, just the words Signal out of range Page Page Color Startup screen Lamp must be replaced Lamp turns onStill having problems? Using the keypad buttons Using the remote control Troubleshooting the remoteUsing the audio Troubleshooting audioConnecting external speakers Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Picture menu Presets Room Lighting Advanced settings Settings menu Startup Logo Blank Screen Effect Key Picture in Picture Network Language Service menu Network Info Maintenance Cleaning the lensChanging the lens Replacing the projection lamp Resetting the lamp timer Cleaning the dust filter Using the security lockOptional Accessories Part Number AccessoriesStandard Accessories Ship with the projector Part Number AppendixRed LED Behavior Explanation Red LED behavior and projector errorsProjected image size Image sizes for long throw lensPage Numerics DhcpLED XGA If YOU Need Assistance