BOXLIGHT CP-322i/CP-634i user manual Screen Menu, Blank, Start UP

Page 35

SCREEN Menu

With the SCREEN menu, the five items shown in the Table below can be performed. Please perform each operation in accordance with the instructions in the Table.

MENU

MAIN

BLANK

MyScreen

PICTURE-1

START UP

ORIGNAL

PICTURE-2

MyScreen

 

INPUT

MyScreen Size

 

SCREEN

MyScreen Lock

 

OPTION

 

 

: SELECT

 

 

SCREEN Menu

 

 

 

 

 

 

 

 

Example : SCREEN Menu

 

 

 

 

 

 

 

 

 

(BLANK)

Item

 

 

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selection of BLANK Screen:

 

 

 

 

 

 

 

 

 

 

 

MyScreen

ORIGINAL

.

 

.

. .

.

 

.

 

 

 

 

 

 

 

The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen

 

has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the

 

“Temporarily Blanking the Screen” section of the separate booklet, Vol. 1 (Basic)).

BLANK

MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen

 

(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.

 

ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).

 

Option screens: Various colored non-patterned (plain) screens displayed within the Menus.

The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color screen several minutes after being displayed.

 

Selection of START UP Screen:

 

 

 

MyScreen

ORIGINAL

TURN OFF

 

The START UP Screen may be voluntarily selected. The START UP Screen is displayed when

 

no signal has been inputted, or when spec signals are being inputted.

 

MyScreen: Using the MyScreen category (see this Table, below), one can register a

START UP

desired screen (or screens). At the time of factory shipment, this is set as a non-patterned

 

(plain) blue color screen.

 

 

 

ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).

 

TURN OFF: A non-patterned (plain) blue color screen.

The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen several minutes after being displayed.

Registration of MyScreen:

When this item is executed, the MyScreen Menu for registration of MyScreen for the BLANK Screen and the START UP Screen is displayed. When operations are performed in accordance with this Menu, one can “cut” and register desired screens from among the received images within the display.

1.After the “Do you start capturing this picture?” message has been displayed, pressing the ESC (or RESET) button interrupts execution of the MyScreen. When the ENTER button is pressed, the picture becomes static (no longer moves), and a frame for picture cutting, as well as the message that follows below, appear. Please press the button when the screen you want to register is

MyScreen

currently being displayed.

2.When the “Move the capture area as you want.” message has been displayed, pressing the ESC (or RESET) button will eliminate the static state of the picture, and operations can be performed again from operation 1. The frame can be moved using the , , , buttons. After designating the screen you want to register, pressing the ENTER button will initiate screen registration. The registration process takes approximately 1 minute to complete.

3.When the registration has been completed, the screen of the registered MyScreen, plus the message, “MyScreen registration is finished,” will be displayed for several seconds, after which the operation is terminated.

MyScreen Size

Selection of MyScreen display size:

x1

FULL

 

MyScreen Lock

Invalidation of MyScreen registration function:

TURN ON TURN OFF

When TURN ON is selected, the MyScreen category (see this Table, above) cannot be executed; in this way, one can prohibit rewrites (“writeovers”) of the MyScreen.

5

Image 35
Contents CP-322i/CP-634i Contents Projector Features Power cord Only use the power cord that came with the projectorDevices you will be using to the projector Reference Part NamesCursor buttons Auto button Blank button Volume button Mute buttonFreeze button Keyboard buttons Position buttonAdjusting the Projectors Elevator Feet Setting UP the ProjectorTop view Side view Adjusting the Screen Size and Projection DistanceScreen Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Operating the remote control Using the Remote ControlPutting batteries into the remote control unit Turning on the Power Selecting an Input Signal Turning OFF the Power Temporarily Muting the Sound Adjusting the VolumePress the Volume button Press Buttons to adjust VolumePress the Position button Adjusting the PositionUse Buttons to adjust Position Press the Auto button Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Automatic Adjustment for Video InputOn the screen to aid you in correcting the distortion Correcting Keystone DistortionsPress the Keystone button As illustrated on the right, a dialog will appearFreezing the Screen Using the Magnify FeatureTemporarily Blanking the Screen Signal SearchingSelecting the Aspect Ratio Press Buttons to adjust the level Using the Menu FunctionsSelect a menu using Buttons Then press Or Enter button Select an item using Buttons, then press Or Enter buttonOperating the PC Screen Available Functions Remote Control OperationDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Replacing the lamp Caring for the air filter AIR FilterReplacing the air filter Caring for the lens Caring for the cabinet and remote control transmitterOther Care Caring for the inside of the projectorFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu PICTURE2 Menu Picture 1 MenuPicture 2 Menu PICTURE1 MenuVideo Input MenuInput Menu AutoStart UP Screen MenuScreen Menu BlankWhisper Option MenuOption Menu Auto OFFRelated Messages Power Lamp Temp Regarding the Indicator LampsVol.2-6 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-3Sub 15-pin Shrink Signal Connector PIN AssignmentSignal Terminal Specification RGB in 1/2Resolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalInitial SET Signals PS/2 Mouse Connection to the Mouse ControlADB Mouse USB MouseProtocol Command dataConsist of header 7 bytes + command data 6 bytes RS-232C CommunicationIncreasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset Command日本語 Command data chartBe EF BA D2 Be EF FD D3 Be EF Ntsc PAL Regulatory Notices Limited Warranty Disclaimer of Unstated Warranties

CP-322i/CP-634i specifications

The BOXLIGHT CP-322i and CP-634i are innovative interactive projectors designed to enhance the learning experience in classrooms and collaborative spaces. Both models are part of BOXLIGHT's commitment to integrating advanced technology into education, making lessons more engaging and interactive for students and teachers alike.

The CP-322i is a compact and versatile projector that boasts a 3200-lumen brightness, ensuring vibrant and clear images even in well-lit environments. It features a WXGA resolution (1280x800), making it ideal for projecting detailed presentations, videos, and interactive content. Equipped with a short throw lens, the CP-322i can project large images from a minimal distance, which is perfect for small classrooms where space is limited.

On the other hand, the CP-634i is a high-performance interactive projector that provides an impressive 3600-lumen brightness along with a higher resolution of WUXGA (1920x1200). This model excels in larger classrooms and seminar halls, offering clarity and sharpness that meet the demands of contemporary educational settings. Its ultra-short throw design allows teachers to position the projector just inches from the screen, reducing shadows and glare to create a comfortable teaching environment.

Both projectors incorporate advanced interactive technologies, enabling educators and students to engage in hands-on learning. The interactive features allow users to annotate, highlight, and manipulate content directly on the projected image using special pens or touch-enabled screens. This fosters an interactive learning experience, encouraging participation and collaboration among students.

Additionally, the BOXLIGHT CP-322i and CP-634i support multiple connectivity options, including HDMI, USB, and wireless capabilities. This versatility ensures compatibility with a wide range of devices such as laptops, tablets, and smartphones, allowing for seamless integration into any classroom setup. The projectors also come with built-in speakers, eliminating the need for external audio equipment for most applications.

In summary, the BOXLIGHT CP-322i and CP-634i are outstanding interactive projectors that bring state-of-the-art technology to educational settings. With their high brightness levels, resolutions, and interactive features, they empower educators to create dynamic and engaging learning environments. Whether in small classrooms or larger spaces, these projectors make a significant impact on the educational experience, preparing students for a tech-driven world.