BOXLIGHT CP-322i/CP-634i user manual Requesting projector status Get command

Page 45

RS-232C COMMUNICATION (continued)

Requesting projector status (Get command)

(1)Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) from the computer to the projector.

(2)The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1)Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.

(2)The projector changes the setting based on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1)The computer sends the default setting code Header + Command data (‘06H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector changes the specified setting to the default value.

(3)The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1)The computer sends the increment code Header + Command data (‘04H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector in creases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1)The computer sends the decrement code Header + Command data (‘05H’+‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector.

(2)The projector decreases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

When a command sent by the projector cannot be understood by the computer

When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is returned, please send the same command again.

When data sent by the projector cannot be practice

When the command sent by the projector cannot be practiced, the the error code ‘1cH’ +‘xxxxH’ is returned.

When the data length is greater than indicated by the data length code, the projector will ignore the excess data code.

Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to the projector.

NOTE Operation cannot be guaranteed when the projector receives an undefined command or data.

Provide an interval of at least 40ms between the response code and any other code.

The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.

Commands are not accepted during warm-up.

6

Image 45
Contents CP-322i/CP-634i Contents Projector Features Only use the power cord that came with the projector Devices you will be using to the projectorPower cord Reference Part NamesFreeze button Keyboard buttons Auto button Blank button Volume button Mute buttonPosition button Cursor buttonsAdjusting the Projectors Elevator Feet Setting UP the ProjectorAdjusting the Screen Size and Projection Distance ScreenTop view Side view Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Using the Remote Control Putting batteries into the remote control unitOperating the remote control Turning on the Power Selecting an Input Signal Turning OFF the Power Press the Volume button Adjusting the VolumePress Buttons to adjust Volume Temporarily Muting the SoundAdjusting the Position Use Buttons to adjust PositionPress the Position button Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionFreezing the Screen Using the Magnify FeatureSignal Searching Selecting the Aspect RatioTemporarily Blanking the Screen Select a menu using Buttons Then press Or Enter button Using the Menu FunctionsSelect an item using Buttons, then press Or Enter button Press Buttons to adjust the levelOperating the PC Screen Available Functions Remote Control OperationHigh Voltage High Temperature High Pressure LampDo not use the projector with the lamp cover removed Replacing the lamp Caring for the air filter AIR FilterReplacing the air filter Other Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Multifunctional Settings Main MenuMain Menu Picture 2 Menu Picture 1 MenuPICTURE1 Menu PICTURE2 MenuInput Menu Input MenuAuto VideoScreen Menu Screen MenuBlank Start UPOption Menu Option MenuAuto OFF WhisperRelated Messages Power Lamp Temp Regarding the Indicator LampsVol.2-2 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-3 Vol.2-6Signal Terminal Specification Signal Connector PIN AssignmentRGB in 1/2 Sub 15-pin ShrinkResolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalInitial SET Signals ADB Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseConsist of header 7 bytes + command data 6 bytes Command dataRS-232C Communication ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment command日本語 Command data chartBe EF BA D2 Be EF FD D3 Be EF Ntsc PAL Regulatory Notices Limited Warranty Disclaimer of Unstated Warranties

CP-322i/CP-634i specifications

The BOXLIGHT CP-322i and CP-634i are innovative interactive projectors designed to enhance the learning experience in classrooms and collaborative spaces. Both models are part of BOXLIGHT's commitment to integrating advanced technology into education, making lessons more engaging and interactive for students and teachers alike.

The CP-322i is a compact and versatile projector that boasts a 3200-lumen brightness, ensuring vibrant and clear images even in well-lit environments. It features a WXGA resolution (1280x800), making it ideal for projecting detailed presentations, videos, and interactive content. Equipped with a short throw lens, the CP-322i can project large images from a minimal distance, which is perfect for small classrooms where space is limited.

On the other hand, the CP-634i is a high-performance interactive projector that provides an impressive 3600-lumen brightness along with a higher resolution of WUXGA (1920x1200). This model excels in larger classrooms and seminar halls, offering clarity and sharpness that meet the demands of contemporary educational settings. Its ultra-short throw design allows teachers to position the projector just inches from the screen, reducing shadows and glare to create a comfortable teaching environment.

Both projectors incorporate advanced interactive technologies, enabling educators and students to engage in hands-on learning. The interactive features allow users to annotate, highlight, and manipulate content directly on the projected image using special pens or touch-enabled screens. This fosters an interactive learning experience, encouraging participation and collaboration among students.

Additionally, the BOXLIGHT CP-322i and CP-634i support multiple connectivity options, including HDMI, USB, and wireless capabilities. This versatility ensures compatibility with a wide range of devices such as laptops, tablets, and smartphones, allowing for seamless integration into any classroom setup. The projectors also come with built-in speakers, eliminating the need for external audio equipment for most applications.

In summary, the BOXLIGHT CP-322i and CP-634i are outstanding interactive projectors that bring state-of-the-art technology to educational settings. With their high brightness levels, resolutions, and interactive features, they empower educators to create dynamic and engaging learning environments. Whether in small classrooms or larger spaces, these projectors make a significant impact on the educational experience, preparing students for a tech-driven world.