BOXLIGHT MP-37t manual Main Menu Display Image Adjust, Decrease Increase, Lighter Deeper

Page 39

COMPUTER MODE

PICTURE IMAGE ADJUSTMENT

Picture adjustments have been preset at the factory. If you want to change the setting, operate the projector as follows.

1.Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.

2.Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and press the SELECT BUTTON. Another dialog box IMAGE ADJUST DISPLAY will appear. This shows the current picture settings.

3.In this dialog box, you can adjust the settings by increasing or decreasing the levels shown as numbers. The items and the range of the levels that you can adjust are summarized in the table below.

4.Press the POINT DOWN BUTTON and a red arrow will appear.

5.Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).

6.To increase the level, point the arrow to ▲ and then press the SELECT BUTTON. To decrease the level, point the arrow to ▼ and then press the SELECT BUTTON.

7.You may want to store the settings in the memory so that you can recall them later. To store the settings, move the arrow to Stored and then press the SELECT BUTTON. When you have stored the settings, "OK ?" is displayed for confirmation.

8.Move the arrow to Yes and then press the SELECT BUTTON. The stored settings are memorized even if the MAIN ON/OFF is switched off.

9.To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.

10.If you do not want to store the settings, move the arrow to Quit and then press the SELECT BUTTON. The settings changed remains effective until the MAIN ON/OFF switch is turned off.

11.To recall the settings from the memory that you have stored, move the arrow to Reset and then press the SELECT BUTTON. When you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press the SELECT BUTTON. You can adjust the settings again if needed.

NOTE: The "Fine sync." and "Total dots" cannot be fully adjusted when "RGB", "HDTV1035i" or "HDTV1080i" is selected on the COMPUTER SYSTEM SELECT menu. (See pages 36 ~ 37).

MAIN MENU DISPLAY

IMAGE ADJUST

DISPLAY

NOTE:

The projector may not reproduce a proper image for some SXGA signals.

Since SXGA (1280 x 1024) image is converted to 960 x 768 image by partial scan, some lines and dots of the image do not appear.

Some video noise of flicker on this compressed SXGA image cannot be eliminated even though you try to make a Fine sync adjustment.

TABLE OF PICTURE IMAGE ADJUSTMENT

FINE SYNC

Adjust the picture as necessary to eliminate

 

127

flicker from the display.

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TOTAL DOTS

The number of the total dots in one horizontal period. Adjust the

 

number to match your PC image.

 

 

 

 

WHITE BALANCE (R/G/B)

DECREASE

0

 

 

63

INCREASE

 

 

 

 

 

 

CONTRAST

LIGHTER

0

 

 

63

DEEPER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BRIGHTNESS

DARKER

0

 

 

63

BRIGHTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Boxlight MP-37t To the Owner Important Safety Instructions Table of Contents Features and Design Rear of the Projector InstallationName of Each Part of the Projector Front of the ProjectorVentilation SETTING-UP the ProjectorPositioning Room LightFeet Lock Latches Down Adjustable FeetAdjustable Feet Moving the ProjectorProjector side Female AC outlet side Male Power RequirementsTerminal of the Projector Connecting the ProjectorControl Port Connecting the ComputerConnecting to the Monitor Output Terminal HDB 15-PIN TerminalConnecting AN IBM-COMPATIBLE Desktop Computer Connecting AN IBM-COMPATIBLE Laptop Computer Audio Cable Not Provided Computer Audio Input Connecting a Macintosh Desktop ComputerAdapter shipped with the PowerBook Connecting a Macintosh Powerbook ComputerConnecting to the Component Video Input Jacks Connecting the Video EquipmentConnecting to the Video Input Jack Connecting S-VHS Video Input JackVideo Equipment Connecting the Video EquipmentConnecting to the EXT. SP. Jack 3.5 mm mini stereo type Before Operation Controls and IndicatorsFront Indicators TOP Controls Front Indicators TOP ControlsPage Operation of the Remote Control Infrared Signal Window Laser Light WindowLaser Pointer Computer Select Button Remote Control Battery Installation Direct Operation Control the ProjectorCOMPUTER/VIDEO Mode Video ModeMenu Operation Menu Point LEFT/RIGHT Select Point LEFT/RIGHT/UP/DOWN Computer ModeBasic Operation Turning ON/OFF the ProjectorDirect Operation Sound Mute Function Sound Volume AdjustmentZoom Adjustment Focus AdjustmentAuto Image Function Timer FunctionNo Show Function Freeze Picture FunctionMenu Operation Language Setting Display Sound AdjustmentLanguage Adjustment Sound Adjust DisplayVideo Mode Color System SelectColor System Display Main Menu Display Component Video System Display Video Source SelectComponent Video System Select Main Menu Display Video SourceImage Adjust Display Table of Picture Image Adjustment Picture Image AdjustmentScreen Adjust Display Picture Screen AdjustmentComputer System Select Computer ModePC Adjustment Computer System Display Current Mode Main Menu DisplayCompatible Computer Specifications Main Menu Display Auto Image Setting Darker Brighter Main Menu Display Image AdjustDecrease Increase Lighter DeeperMain Menu Display Position Setting Picture Position AdjustmentPC Adjustment OK ? 630 1056 PC Adjustment DisplayMode Free Digital zoom Main Menu Display Screen AdjustBlue Back On or Off Other Function SettingRemote Control Code Change Mode 1 or Mode Lamp AGE Appendix MaintenanceTemperature Warning Indicator AIR Filter Care and CleaningLamp Assembly Handle Lamp ReplacementOrder Replacement Lamp Lamp Replacement Indicator CoverCleaning the Lens TroubleshootingService Remote Control Transmitters Technical SpecificationsLimited Warranty

MP-37t specifications

The BOXLIGHT MP-37t is a state-of-the-art interactive projector designed to enhance the educational experience in classrooms and training environments. With its advanced features and user-friendly technologies, this device has rapidly become a preferred choice for educators looking to create engaging learning atmospheres.

One of the standout characteristics of the BOXLIGHT MP-37t is its impressive brightness rating of 3700 lumens. This level of brightness ensures that presentations, videos, and other instructional materials are clearly visible, even in well-lit rooms. Coupled with a contrast ratio of 20,000:1, the projector delivers vibrant colors and sharp imagery, which are crucial for retaining student attention and improving information retention.

The MP-37t boasts a native resolution of 1024 x 768 (XGA), allowing for clear and detailed visuals. However, it also supports several higher resolutions, making it versatile for a variety of content types. This flexibility is essential for educators who frequently switch between standard presentations, high-definition videos, and complex graphics.

A key feature of this projector is its interactive capabilities. The MP-37t can transform any flat surface into an interactive workspace, allowing multiple users to engage with the projected content simultaneously. The interactive pen technology enhances interactivity, enabling educators to annotate, highlight, and manipulate content in real-time. This feature fosters collaboration and participation among students, enhancing the overall learning experience.

Connectivity options are abundant, with HDMI, USB, and VGA ports available, ensuring compatibility with various devices like laptops, tablets, and smartphones. The built-in wireless connectivity further expands its functionality, allowing users to stream content directly from their devices without the hassle of cables.

The BOXLIGHT MP-37t also includes a long-lasting lamp that can provide up to 10,000 hours of usage, reducing maintenance costs and downtime. Furthermore, its lightweight and compact design make it highly portable, allowing educators to easily move it between classrooms or take it to off-site training sessions.

In summary, the BOXLIGHT MP-37t is an innovative interactive projector that seamlessly combines high brightness, versatile connectivity, and engaging interactive features. Ideal for today's dynamic educational environments, it empowers educators to present information in captivating ways, ultimately fostering a more effective and interactive learning experience.
Top Page Image Contents