BOXLIGHT MP-37t manual Order Replacement Lamp, Lamp Replacement Indicator Cover

Page 50

APPENDIX

LAMP REPLACEMENT

If the lamp fails to come on and the lamp monitor on the projector light is orange, you must replace the lamp.

For continued safety, replace with a lamp assembly of the same type.

Allow the projector to cool for at least 45 minutes before you open the lamp cover. The inside of the projector can become very hot.

Do not drop the lamp module or touch the glass bulb ! The glass can shatter and cause injury.

Follow these steps to replace the lamp assembly.

1.Turn off the projector and allow the projector to cool thoroughly.

2.Disconnect the AC cord from the projector.

3.Remove screw with a screwdriver and remove the lamp cover.

4.Remove 2 screws with a screwdriver and pull out the lamp assembly by grasping the handle.

5.Replace the lamp assembly.

6.Tighten 3 screws to secure the lamp cover and the lamp assembly.

7.Connect the detachable AC cord to the projector.

8.Reset the lamp replacement monitor timer.

(See "LAMP AGE" section on page 48.)

NOTE: Do not reset the LAMP REPLACEMENT MONITOR TIMER, except after the lamp is replaced.

LAMP REPLACEMENT INDICATOR

LAMP

COVER

ORDER REPLACEMENT LAMP

LAMP

ASSEMBLY

HANDLE

Replacement Lamp can be ordered through Boxlight Corporation at 1-800-762-5757 or 360-779-7901.

50

Image 50
Contents Boxlight MP-37t To the Owner Important Safety Instructions Table of Contents Features and Design Front of the Projector InstallationName of Each Part of the Projector Rear of the ProjectorRoom Light SETTING-UP the ProjectorPositioning VentilationMoving the Projector Adjustable FeetAdjustable Feet Feet Lock Latches DownPower Requirements Projector side Female AC outlet side MaleConnecting the Projector Terminal of the ProjectorHDB 15-PIN Terminal Connecting the ComputerConnecting to the Monitor Output Terminal Control PortConnecting AN IBM-COMPATIBLE Desktop Computer Connecting AN IBM-COMPATIBLE Laptop Computer Connecting a Macintosh Desktop Computer Audio Cable Not Provided Computer Audio InputConnecting a Macintosh Powerbook Computer Adapter shipped with the PowerBookConnecting S-VHS Video Input Jack Connecting the Video EquipmentConnecting to the Video Input Jack Connecting to the Component Video Input JacksConnecting the Video Equipment Video EquipmentConnecting to the EXT. SP. Jack 3.5 mm mini stereo type Front Indicators TOP Controls Controls and IndicatorsFront Indicators TOP Controls Before OperationPage Laser Pointer Operation of the Remote ControlInfrared Signal Window Laser Light Window Computer Select Button Remote Control Battery Installation Control the Projector Direct OperationMenu Operation COMPUTER/VIDEO ModeVideo Mode Computer Mode Menu Point LEFT/RIGHT Select Point LEFT/RIGHT/UP/DOWNDirect Operation Basic OperationTurning ON/OFF the Projector Focus Adjustment Sound Volume AdjustmentZoom Adjustment Sound Mute FunctionFreeze Picture Function Timer FunctionNo Show Function Auto Image FunctionMenu Operation Sound Adjust Display Sound AdjustmentLanguage Adjustment Language Setting DisplayColor System Display Video ModeColor System Select Main Menu Display Video Source Video Source SelectComponent Video System Select Main Menu Display Component Video System DisplayPicture Image Adjustment Image Adjust Display Table of Picture Image AdjustmentPicture Screen Adjustment Screen Adjust DisplayComputer System Display Current Mode Main Menu Display Computer ModePC Adjustment Computer System SelectCompatible Computer Specifications Main Menu Display Auto Image Setting Lighter Deeper Main Menu Display Image AdjustDecrease Increase Darker BrighterPicture Position Adjustment Main Menu Display Position SettingPC Adjustment OK ? PC Adjustment Display 630 1056Mode Free Main Menu Display Screen Adjust Digital zoomOther Function Setting Blue Back On or OffRemote Control Code Change Mode 1 or Mode Lamp AGE AIR Filter Care and Cleaning MaintenanceTemperature Warning Indicator AppendixLamp Replacement Indicator Cover Lamp ReplacementOrder Replacement Lamp Lamp Assembly HandleTroubleshooting Cleaning the LensService Technical Specifications Remote Control TransmittersLimited Warranty

MP-37t specifications

The BOXLIGHT MP-37t is a state-of-the-art interactive projector designed to enhance the educational experience in classrooms and training environments. With its advanced features and user-friendly technologies, this device has rapidly become a preferred choice for educators looking to create engaging learning atmospheres.

One of the standout characteristics of the BOXLIGHT MP-37t is its impressive brightness rating of 3700 lumens. This level of brightness ensures that presentations, videos, and other instructional materials are clearly visible, even in well-lit rooms. Coupled with a contrast ratio of 20,000:1, the projector delivers vibrant colors and sharp imagery, which are crucial for retaining student attention and improving information retention.

The MP-37t boasts a native resolution of 1024 x 768 (XGA), allowing for clear and detailed visuals. However, it also supports several higher resolutions, making it versatile for a variety of content types. This flexibility is essential for educators who frequently switch between standard presentations, high-definition videos, and complex graphics.

A key feature of this projector is its interactive capabilities. The MP-37t can transform any flat surface into an interactive workspace, allowing multiple users to engage with the projected content simultaneously. The interactive pen technology enhances interactivity, enabling educators to annotate, highlight, and manipulate content in real-time. This feature fosters collaboration and participation among students, enhancing the overall learning experience.

Connectivity options are abundant, with HDMI, USB, and VGA ports available, ensuring compatibility with various devices like laptops, tablets, and smartphones. The built-in wireless connectivity further expands its functionality, allowing users to stream content directly from their devices without the hassle of cables.

The BOXLIGHT MP-37t also includes a long-lasting lamp that can provide up to 10,000 hours of usage, reducing maintenance costs and downtime. Furthermore, its lightweight and compact design make it highly portable, allowing educators to easily move it between classrooms or take it to off-site training sessions.

In summary, the BOXLIGHT MP-37t is an innovative interactive projector that seamlessly combines high brightness, versatile connectivity, and engaging interactive features. Ideal for today's dynamic educational environments, it empowers educators to present information in captivating ways, ultimately fostering a more effective and interactive learning experience.