Acer AL1716W manual Installation, Steps

Page 9

AL1716W

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.1-1 Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

1-2 Digital Cable (Only Dual-Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.

2.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

Please don’t open the cover

E-8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Table of Contents Special Notes on LCD Monitors Japanese Material Content DeclarationIntroduction FeaturesUnpacking Attaching / Removing the Base Screen Position AdjustmentCleaning Your Monitor Connecting the Power CordMode Resolution Freq Band Width Polarity KHz MHz Preset ModesPower Saving State Power LED Light ConsumptionDDC Steps InstallationMenu / Enter User ControlsMain Sub Menu Description Icon HOW to Adjust a SettingMain Sub Menu Sub Menu Item Description Icon DDC/CI Problems Current Status Remedy TroubleshootingLED on LED OFFDVI Mode Vesa DDCCI/DDC2B EPA Energy Star SpecificationCUL, FCC, VCCI, CCC, MPR II, CE
Top Page Image Contents