Onkyo A-1VL instruction manual Important Safety Instructions, Avis

Page 2
PORTABLE CART WARNING
S3125A

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

 

AVIS

RISK OF ELECTRIC SHOCK

 

RISQUE DE CHOC ELECTRIQUE

DO NOT OPEN

 

NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radia- tors, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are pro- vided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta- cles, and the point where they exit from the appara- tus.

11.Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table spec- ified by the manufacturer, or sold with the apparatus. When a cart is used, use cau- tion when moving the cart/ apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Damage Requiring Service

Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power-supply cord or plug is dam- aged,

B.If liquid has been spilled, or objects have fallen into the apparatus,

C.If the apparatus has been exposed to rain or water,

D.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,

E.If the apparatus has been dropped or damaged in any way, and

F.When the apparatus exhibits a distinct change in performance this indicates a need for service.

16.Object and Liquid Entry

Never push objects of any kind into the apparatus through openings as they may touch dangerous volt- age points or short-out parts that could result in a fire or electric shock.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.

Don’t put candles or other burning objects on top of this unit.

17.Batteries

Always consider the environmental issues and fol- low local regulations when disposing of batteries.

18.If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is ade- quate ventilation.

Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a flue-like gap for warm air to escape.

2

Image 2
Contents 1VL Important Safety Instructions AvisPrecautions Recording CopyrightFeatures Supplied AccessoriesTable of Contents Rear Panel Front & Rear PanelsFront Panel AMP section Remote ControllerRemote Controller RC-573A CD sectionInserting the Batteries Remote ControllerUsing the Remote Controller Before Making Any Connections Connecting the A-1VLConnecting Your Speakers Connecting the A-1VL Audio ComponentsConnecting the Power Cord Connecting a Power AmplifierConnecting a Preamp Turning on the A-1VL Muting the A-1VL remote controller onlyEnjoying Audio Sources Playing a Connected ComponentRecording Using the Direct FunctionEnjoying Audio Sources Troubleshooting AudioSpecifications Pre Outputs Speaker Outputs3 4 3 5 5 1 a

A-1VL specifications

The Onkyo A-1VL is a distinguished integrated amplifier that appeals to audiophiles seeking high-quality sound reproduction without compromising on modern technology. Known for its blend of simplicity and performance, the A-1VL showcases several key features, innovative technologies, and characteristics that make it stand out in its class.

First and foremost, the Onkyo A-1VL is built around a robust amplification system. It employs a toroidal transformer which enhances power efficiency while reducing electromagnetic interference. This design contributes to cleaner sound with minimal distortion, ensuring that users experience their music as it was intended by the artists. With a powerful output of 50 watts per channel into 8 ohms and doubling down to 100 watts into 4 ohms, the A-1VL is capable of driving a wide range of speakers, making it a versatile choice for various audio setups.

In terms of connectivity, the A-1VL offers a generous selection of inputs, allowing users to connect multiple sources easily. With five line-level inputs, including a dedicated phono input for turntables, it caters to vinyl enthusiasts as well as digital audio users. The inclusion of tone controls allows listeners to fine-tune their sound, ensuring that the listening experience can be customized to personal preferences.

One of the standout characteristics of the Onkyo A-1VL is its discreet output stage, which employs a Class A/B configuration. This amplification method strikes an optimal balance between sound quality and thermal efficiency, providing an engaging audio experience without overheating. The amplifier’s design also features high-quality components, including fine-grade capacitors and advanced circuit topology that work together to deliver clear, dynamic sound with a natural tonal balance.

Additionally, the sleek and minimalist design of the A-1VL makes it a visually appealing addition to any audio setup. Its understated aesthetic, complete with a brushed aluminum front panel, ensures that it fits seamlessly into both contemporary and traditional environments.

Overall, the Onkyo A-1VL integrated amplifier represents a brilliant fusion of robust performance, elegant design, and user-friendly features. Its commitment to audio fidelity ensures that listeners can enjoy their favorite music with clarity and emotional depth, making it an excellent choice for those serious about sound quality. Whether used in a dedicated listening room or as part of a more casual setup, the A-1VL continues to uphold Onkyo’s legacy of excellence in high-fidelity audio.