Connecting the A-1VL, Before Making Any Connections

Connecting the A-1VL

Before Making Any Connections

•Read the manuals supplied with your components.

•Don’t connect the power cord until you’ve completed all audio and video connctions.

RCA/Phono Connection Color Coding

RCA/Phono connections are usually color coded: red and white. Use red plugs to connect right-channel audio inputs and outputs (typically labeled “R”).

Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”). And use yellow plugs to connect composite video inputs and outputs.

Caution:

•Do not connect speakers having impedance values of 4 ohms or lower.

•Do not connect more than one speaker cord to indi- vidual speaker terminals. Connecting more than one speaker cord may cause failure.

•Unnecessarily long, or very thin speaker cables may affect the sound quality and should be avoided.

•Be careful not to short the positive

and negative wires. Doing so may damage the A-1VL.

Analog audio

Right (red)

Left (white)

•Push plugs in all the way to make good connections (loose connections can cause noise or malfunctions).

•To prevent interference, keep audio and video cables away from power cords and speaker cables.

Right (red) Left (white)

Right!

Wrong!

1 Strip away approx. 5/8 inch		15 mm
(15 mm) of insulation from the		15 mm
(15 mm) of insulation from the
ends of the speaker cables, and
ends of the speaker cables, and
twist the bare wires tightly, as
shown.

2Twist the wire ends tightly together.

3Unscrew the speaker terminal.

4Fully insert the bare wires.

Connecting Your Speakers

Connect the right channel speaker to the RIGHT speaker connector on the A-1VL, and the left channel speaker to the LEFT speaker connecter.

Connect the “+” connector on each speaker to the “+” connectors on the A-1VL, and connect the “–” connec- tor on each speaker to the “–” connectors on the A-1VL. Be sure to connect the positive and negative cables for the speakers properly. If they are mixed up, the left and right signals will be reversed and the audio will sound unnatural.

5Screw the terminal tight.

Changing the Speaker

Impedance Value Setting

The A-1VL allows you to set the speaker impedance values according to the speakers you use, adjusting the optimum frequency characteristics against speaker loads.

Front Speaker

(Right)

Front Speaker

(Left)

We recommend you set the “SPEAKER IMPEDANCE SELECTOR” setting to “8 OHMS MIN./SPEAKER” for speakers having impedance of 8 ohms or higher. Likewise, you may want to set the setting to “4 OHMS MIN./SPEAKER” for speakers having impedance of 4 ohms or higher.

A-1VL specifications

The Onkyo A-1VL is a distinguished integrated amplifier that appeals to audiophiles seeking high-quality sound reproduction without compromising on modern technology. Known for its blend of simplicity and performance, the A-1VL showcases several key features, innovative technologies, and characteristics that make it stand out in its class.

First and foremost, the Onkyo A-1VL is built around a robust amplification system. It employs a toroidal transformer which enhances power efficiency while reducing electromagnetic interference. This design contributes to cleaner sound with minimal distortion, ensuring that users experience their music as it was intended by the artists. With a powerful output of 50 watts per channel into 8 ohms and doubling down to 100 watts into 4 ohms, the A-1VL is capable of driving a wide range of speakers, making it a versatile choice for various audio setups.

In terms of connectivity, the A-1VL offers a generous selection of inputs, allowing users to connect multiple sources easily. With five line-level inputs, including a dedicated phono input for turntables, it caters to vinyl enthusiasts as well as digital audio users. The inclusion of tone controls allows listeners to fine-tune their sound, ensuring that the listening experience can be customized to personal preferences.

One of the standout characteristics of the Onkyo A-1VL is its discreet output stage, which employs a Class A/B configuration. This amplification method strikes an optimal balance between sound quality and thermal efficiency, providing an engaging audio experience without overheating. The amplifier’s design also features high-quality components, including fine-grade capacitors and advanced circuit topology that work together to deliver clear, dynamic sound with a natural tonal balance.

Additionally, the sleek and minimalist design of the A-1VL makes it a visually appealing addition to any audio setup. Its understated aesthetic, complete with a brushed aluminum front panel, ensures that it fits seamlessly into both contemporary and traditional environments.

Overall, the Onkyo A-1VL integrated amplifier represents a brilliant fusion of robust performance, elegant design, and user-friendly features. Its commitment to audio fidelity ensures that listeners can enjoy their favorite music with clarity and emotional depth, making it an excellent choice for those serious about sound quality. Whether used in a dedicated listening room or as part of a more casual setup, the A-1VL continues to uphold Onkyo’s legacy of excellence in high-fidelity audio.