Acer P221W manual Installation, EN-12

Page 13

P221W

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.1-1 Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

1-2 Digital Cable (Only Dual-Input Model)

a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.

2.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

EN-12

Image 13

Contents Table of Contents EN-1 Special Notes on LCD MonitorsSafe listening Safety instructionsEN-2 LCD Pixel Statement Product servicingTips and information for comfortable use Finding your comfort zoneDeveloping good work habits Taking care of your visionEN-4 EN-5 UnpackingEN-6 Screen Position AdjustmentSafety Precaution Connecting the Power CordLeaning Your Monitor EN-7LED DDCLight BluePIN no Description Connector PIN AssignmentEN-9 Meaning PINEN-10 EN-11 YDvEN-12 InstallationMenu / Enter User ControlsEN-13 When user press Menu button on front bezel HOW to Adjust a SettingEN-14 EN-15 ∙ Acer eColor Management OSD ∙ Operation instructionsEN-16 UserEN-17 ACMEN-18 DDC/CI OSDEN-19 LED on TroubleshootingLED OFF EN-20EN-21