Acer AL1912 Power Consumption, Connectors / Controls, Monitor Control Keys, Position Of Controls

Power Consumption

The monitor is equipped with a power-management according to the below.

There is a delay of 5s … 7s before the transition from On-state to any power saving state to avoid unintentionally entering of a power saving stage during display resolution and timing mode changes. Transition from any power saving state to another can be instantaneous.

The recovery from Off-state requires no manual power on.

Mode	H-Sync.	V-Sync.		Video		Pw-cons.	Indicator	Rec. time*
Power-On	on	on		active		< 60W	Green LED	--
Power-off	off	off		blanked		< 3 W	Orange LED	< 5S
Switch-off						< 3 W	Dark LED
SYNC. On means: Normal operation
SYNC. Off means:		H sync.	F < 10KHz duty cycle > 25%
		V sync.	F < 10Hz		duty cycle > 25%

CONNECTORS / CONTROLS

Connectors

-	Power		: Monitor rear side			: AC Inlet
-	Analog RGB		: Monitor rear side / Data Cable			: 15-pin D-sub female / male
	Pin – Assignment of 15-pin D-sub:
	1	Red Video		9	+5V FOR DDC
	2	Green Video		10	Detect
	3	Blue Video		11	Serial Data for ISP
	4	Serial Clock for ISP		12	Serial Data for DDC
	5	Ground		13	H-Sync.
	6	Red Ground		14	V-Sync.
	7	Green Ground		15	Serial Clock for DDC
	8	Blue Ground
-	Audio			: Monitor rear side		:
				-PC I/P for PC		: 3.5mm Stereo female

Monitor Control Keys

KEY :Power , Menu , Adjust +/- , Vol +/-, Auto

Position Of Controls

Position of all switches	: Bottom side of front bezel
Position of LED	: Bottom side of front bezel

- 29 -