Remote Control Description, Return Freeze, Ratio

BOXLIGHT CD-725c User’s Guide

Remote Control Description

The remote control sensors are located in the front/ back of the projector. The distance between the sensor and the remote control should not exceed 6 meters (20 feet).

Power

3 Left/ Keystone -

4Right/ Keystone +

Auto

L-Click/ R-click

Zoom in/ out

LED

Laser Pointer

Source

Exit

Blank

Mouse Pad

Drag

By pressing ZOOM IN +, the center of the picture will be magnified. When the + button is pressed again, the picture is further magnified, up to four times the original size. By pressing ZOOM OUT -, the size of the image is reduced. When the - button is pressed again, the picture is further reduced until it is restored to its original size. To return to the normal display mode, press the RETURN button. (This function can be used in combination with FREEZE. )

Return

Freeze

The image is frozen when FREEZE is pressed. A “Pause” icon will appear in the lower right corner of the screen for three seconds. To stop the freeze function, press the FREEZE button, RETURN button or SOURCE button (when the input source is switched over during display) again. A “Play” icon will appear in the lower right corner of the screen for three seconds when the freeze function is stopped.

Volume +/-

Mute

PIP Source

PIP Pos.

PIP Size

By pressing the PIP-Source, PIP-Pos and PIP-Size hotkeys, you can enable the PIP (Picture In Picture) function and choose the position and size of the PIP image.

Ratio

By pressing the Ratio hotkey, you can select the screen aspect ratio you prefer: 4:3,16:9

8 Introduction