BOXLIGHT CD-725c manual Troubleshooting, Common Problems & Solutions

BOXLIGHT CD-725c User’s Guide

TROUBLESHOOTING

Common Problems & Solutions

PROBLEMS	TRY THESE SOLUTIONS
	• Make sure the power cord is inserted snuged into the AC adapter
	socket.
	• Make sure the power cord is inserted snuged into the power
NO POWER	outlet.
	• Toggle the power switch to the position “1”.
	• Wait two minutes after the projector is turned off before turning
	the projector back on.
	• Check for the proper input source.
NO PICTURE	• Ensure all cables are connected properly.
	• Adjust the brightness and contrast.
	• Remove the lens cap.
TRAPEZOID	• Reposition the unit to improve its angle on the screen.
IMAGE ON	• Use the Keystone correction key on the control panel of the
THE SCREEN	projector or the remote control unit.
POOR COLOR	• Select the correct video system.
	• Adjust brightness, contrast, or saturation.
	• Press Auto on the control panel of the projector or the remote
	control unit to get better picture quality.
BLURRED	• Adjust the focus.
IMAGE	• Reposition the unit to improve its projection angle.
	• Ensure the distance between the unit and screen is within the
	adjustment range of the lens.
REMOTE	• Replace the batteries with new ones.
	• Make sure there is no obstacle between the remote control and
CONTROL
	the projector.
DOES NOT
	• Stand within 4 meters (13 feet) of the projector.
WORK
	• Make sure nothing is blocking the front and rear receivers.

Troubleshooting 25