BOXLIGHT CP-315T manual To the Owner

Page 2

TO THE OWNER

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “TROUBLESHOOTING” section at the end of this booklet. If the problem still persists, contact

BOXLIGHT.

SAFETY PRECAUTIONS

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces intense light from the projection lens. Do not stare directly into the lens as it could possibly damage your eyes. Be especially careful that children do not stare directly into the beam.

This projector should be set in the way indicated. If not, it may result in a fire hazard.

Provide appropriate space on the top, sides and rear of the

 

 

 

SIDE and TOP

 

REAR

 

projector cabinet for allowing air circulation and cooling the

 

 

 

 

 

 

 

 

 

 

20cm

 

 

 

 

 

 

 

 

projector. Minimum distance should be taken. If the projector is

 

 

 

 

 

 

 

 

 

 

to be built into a compartment or similarly enclosed, the minimum

 

 

 

 

 

 

 

 

 

 

distances must be maintained. Do not cover the ventilation slot

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

on the projector. Heat build-up can reduce the service life of your

 

 

 

50cm

 

50cm

 

 

50cm

 

 

 

 

 

 

 

 

projector, and can also be dangerous.

 

 

 

 

 

 

 

 

 

 

Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.

Remote Control Unit, supplied to this projector, emits the laser beam as the laser pointer function from Laser Light Window while pressing LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate laser emission). Do not look into Laser Light Window or shine the laser beam on yourself or other people. Eye damage may result.

If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

2

Image 2
Contents Boxlight CP-315t To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Compact Design Keystone CorrectionPreparation Name of Each Part of ProjectorFor Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Adjustable Feet Preparation Positioning ProjectorPreparation Moving Projector Video Input Jack Connecting ProjectorTerminals of Projector Terminal Input JackConnecting to Computer Terminals ProjectorConnecting to Video Equipment TerminalsLaser Pointer Function Operation of Remote Control UnitBefore Operation Remote Control Batteries Installation TOP Controls and Indicators Lamp Replace IndicatorFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Sound Menu Before Operation Menu BARGuide Window Turning on Projector Basic OperationTurning on / OFF Projector Turning OFF ProjectorKeystone Adjustment Adjusting ScreenZoom Adjustment Picture Freeze FunctionBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationSelecting Computer System Computer InputSelecting Input Source AutoFreq Computer Input Compatible Computer SpecificationsResolution KHzPC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Menu Picture Image AdjustmentsImage Level Select Direct Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Video InputVideo PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System AV System Menu Video or S-VIDEOCinema Tint Video Input Image Level AdjustmentColor SharpnessProvides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of the Remote Control Unit To change the code of ProjectorLamp Replace Lamp ReplacementAppendix Lamp Handling Precautions Appendix Lamp Replace CounterOperating Wireless Mouse Operating Wireless MouseInstallation Cleaning Projection Lens MaintenanceAIR Filter Care and Cleaning Troubleshooting Does not work Remote Control UnitWireless Mouse Function does notTechnical Specifications Appendix Configurations of Terminals Monitor OUT Terminal AnalogOptional Parts USB Connector Series BWireless Imager Kit Type No Media Card Imager Kit Type NoPage Page Limited Warranty