Picture Screen Adjustment, Screen Menu

COMPUTER INPUT

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the desirable image size.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button(s) to move a red frame pointer to
	SCREEN Menu icon.
2	Press POINT DOWN button and move a red frame pointer to the
	function that you want to select and then press SELECT button.

Normal

Provides image to fit screen size.

True

Provides image in its original size. When the original image size is larger than screen size (1024 x 768), this projector enters “Digital zoom +” mode automatically.

Wide

Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.

Digital zoom +

When Digital zoom + is selected, ON-SCREEN MENU disappears and the message “D. Zoom +” is displayed. Press SELECT button to expand image size. And press POINT UP/DOWN/LEFT/RIGHT button(s) to pan the image. Panning function can work only when the image is larger than screen size.

A projected image can be also expanded by pressing D.ZOOM ▲ button on Remote Control Unit.

Digital Zoom –

When Digital zoom – is selected, ON-SCREEN MENU disappears and the message “D. Zoom –” is displayed. Press SELECT button to compress image size.

A projected image can be also compressed by pressing D.ZOOM ▼ button on Remote Control Unit.

To cancel Digital Zoom +/– mode, press any button except D.ZOOM ▲/▼, SELECT, POINT and LASER buttons.

SCREEN MENU

SCREEN Menu icon

Move the red frame to the function and press SELECT button.

NOTE

●This SCREEN Menu cannot be operated when “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu (P22).

●Wide cannot be selected when “720p (HDTV)” is selected on PC SYSTEM Menu (P22).

●True and Digital zoom +/– cannot be selected when “RGB” is selected on PC SYSTEM Menu (P22).

●This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting projector.

●The image data in other than XGA (1024 x 768) is modified to fit the screen size in initial mode.

●Panning function may not operate properly if the computer system prepared on PC ADJUST Menu is used.