Onkyo A-9070 instruction manual Precautions

Page 3

Precautions

1.Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.

2.AC Fuse—The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer.

3.Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.

4.Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the unit’s rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times.

For models with [POWER] button, or with both [POWER] and [ON/STANDBY] buttons: Pressing the [POWER] button to select OFF mode does not fully disconnect from the mains. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet.

For models with [ON/STANDBY] button only: Pressing the [ON/STANDBY] button to select Standby mode does not fully disconnect from the mains. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet.

5.Preventing Hearing Loss Caution

Excessive sound pressure from earphones and headphones can cause hearing loss.

6.Batteries and Heat Exposure Warning

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat as sunshine, fire or the like.

7.Never Touch this Unit with Wet Hands—Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer.

8.Handling Notes

•If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it.

•Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.

•This unit’s top and rear panels may get warm after prolonged use. This is normal.

•If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally.

For U.S. models

FCC Information for User

CAUTION:

The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

For Canadian Models

NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modèle pour les Canadien

REMARQUE: CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB- 003 DU CANADA.

Sur les modèles dont la fiche est polarisée:

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

En

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 9070 Important Safety Instructions Precautions Supplied Accessories Remote controller and two batteriesPower cord Features Contents Before Using the Integrated Amplifier Installing the BatteriesUsing the Remote Controller Installing the Integrated Amplifier Main in LED Getting to Know the Integrated AmplifierFront Panel 8ON/STANDBY buttonTreble -/+ buttons L m n oRear Panel Remote Controller Banana Plugs North American models Connecting Your SpeakersConnections Screw-type speaker terminalsYou can also output audio from both sets of speakers Tip Bi-wiring ConnectionCable and Jacks Connecting the Power CordIntegrated Amplifier A-9070 CD Player C-7070 Connecting a CD PlayerAnalog Connection Digital Connection Coaxial or OpticalDigital Media Transport Connecting an Onkyo DockIntegrated Amplifier A-9070 Network Tuner T-4070 Connecting a TunerDirect Change Connecting Onkyo u ComponentsAuto Power On Remote ControlConnecting a Cassette Tape Deck Connecting a TurntableConnecting a Recording Component Integrated Amplifier A-9070 Power Amplifier M-5000R Using the Integrated Amplifier as a PreamplifierGraphic equalizer Separating the Pre-amp and Main Amp UnitsPreamplifier P-3000R Integrated Amplifier A-9070 Using the Integrated Amplifier as a Power AmplifierPress Operating with the remote controllerBasic Operations Turning On/Off the Integrated AmplifierAdjusting the Volume Selecting Speakers a and Speakers BOperating on the integrated amplifier Adjusting the Display Brightness Using the Direct FunctionSelecting the Input Source Press Bass -/+,TREBLE -/+, or Balance L/R Adjusting the Bass, Treble and BalanceChanging the Display Information Using Headphones Muting the SoundPress Muting Repeat button Controlling Other Onkyo ComponentsControlling the Onkyo CD Player Random buttonControlling the Onkyo Dock About Onkyo DockShuffle button Controlling the Onkyo Network Tuner #/$and Enter buttonsInput button Changing Input Names Custom SetupSkipping Unused Inputs Setting the Headphone Level Press Setup Press !/repeatedly to select Hplvl Press EnterPress #/$repeatedly to adjust the offset level ` ASb-OFF Setting the Auto Standby FunctionPress Setup Press !/repeatedly to select ASb Press Enter Press #/$to switch between ASb-ON and ASb-OFF ` ASb-ON` PRE Setting the RoutePress Setup Press !/repeatedly to select Route Press Enter Press #/$repeatedly to select the route you want to setRestoring the Default Settings Press Setup Press !/repeatedly to select Reset Press EnterPress #/$to switch between RST-NO and RST-YES Troubleshooting No sound is heard from a connected component Can’t control properly by using the remote controllerRemote controller doesn’t work properly OtherSpecifications Audio InputsAudio Outputs 4 0 0 8 4

A-9070 specifications

The Onkyo A-9070 is a high-performance integrated amplifier that caters to audiophiles seeking exceptional sound quality and versatile connectivity options. Designed with a blend of modern technological advancements and classic analog principles, the A-9070 stands out as a powerhouse in its category.

At the heart of the A-9070 is its high-current capability, which ensures the delivery of dynamic sound reproduction across a varied range of frequencies. This integrated amplifier boasts an impressive power output of 100 watts per channel at 8 ohms, allowing it to drive speakers effectively while maintaining clarity and precision. The use of Onkyo’s Wide Range Amplification Technology (WRAT) ensures that audio signals remain faithful to the original source. The A-9070's transistors are meticulously selected, contributing to enhanced thermal stability and reliability.

Another hallmark feature of the A-9070 is its dual toroidal transformers, designed to minimize unwanted magnetic interference and ensure a clean power supply. This design significantly improves overall audio performance, enhancing detail, dynamics, and transient response. The amplifier also integrates a signal-to-noise ratio of 100 dB, which promotes a silent background, allowing listeners to experience every nuance in their favorite tracks.

The Onkyo A-9070 comes equipped with a variety of analog and digital inputs, facilitating seamless connectivity with multiple devices. There are four line inputs, a phono input for vinyl enthusiasts, and an optical and coaxial digital input for connecting to modern sources. Furthermore, the amplifier features a high-quality DAC (Digital-to-Analog Converter) capable of handling high-resolution audio files, which makes it suitable for both traditional and contemporary audio formats.

Additionally, the A-9070 is designed with user convenience in mind. The front-panel controls are intuitively laid out, and a remote control is included for easy access to all functions. The amplifier also features a dedicated headphone output, allowing for private listening sessions without compromising audio quality.

In conclusion, the Onkyo A-9070 combines exquisite craftsmanship with advanced technology, making it a formidable choice for audio enthusiasts. Its powerful amplification, robust build quality, and diverse connectivity options offer an unparalleled listening experience that caters to both vintage and modern audio setups. Whether you’re spinning vinyl or streaming high-resolution tracks, the A-9070 is designed to deliver rich, immersive sound that brings music to life.
Top Page Image Contents