Onkyo A-9070 instruction manual Other, Can’t control properly by using the remote controller

Page 42

Onkyo Dock

There’s no sound.

•Make sure that the Onkyo Dock is connected to the integrated amplifier properly.

•Make sure that no video content is being played.

•Reset the iPod.

Other

•When the Auto Standby (ASb) function is activated, the

power of the Onkyo Dock connected via uis automatically turned off (➔ page 38).

Can’t control properly by using the remote controller.

•Make sure that the ucable is connected to the integrated amplifier correctly.

You need to change the input name to use ufunction (➔ page 35).

External Components

No sound is heard from a connected component.

•Make sure the correct input source is selected (➔ page 28).

•If “ROUTE” is set to anything other than “NORMAL”, make sure that each component is connected accordingly (➔ page 23 to 25, 39).

•Make sure the analog audio cable is connected correctly (➔ page 16).

The sound from turntable is distorted.

•If your turntable (MM/MC) has a built-in phono preamp, connect to other analog inputs such as LINE IN.

•If your turntable (MM/MC) does not have a built-in phono preamp, connect a turntable to PHONO

(➔ page 21).

•Make sure that the ground wire is connected. Otherwise, it may produce an audible hum and noise.

•Make sure the MM/MC selector is set in accordance with the cartridge format of your turntable.

A popping noise is produced when the power is set to on or off.

•Turn each of the components’ power on or off in the following order.

When turning the power on:

1.Source component

2.Integrated amplifier (A-9070)

When turning the power off:

1.Integrated amplifier (A-9070)

2.Source component

En

Remote Controller

The remote controller doesn’t work properly.

•Make sure the batteries have been installed with the correct polarity (+/–) (➔ page 7).

•Replace both batteries with new ones. (Do not mix different types of batteries or new and old batteries.)

•The remote controller is too far away from the integrated amplifier, or there’s an obstacle between them

(➔ page 7).

•The integrated amplifier’s remote control sensor is being subjected to bright light (inverter-type fluorescent light or sunlight).

•The integrated amplifier is located behind the glass doors of an audio rack or cabinet.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.

The integrated amplifier contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this should happen, unplug the power cord, wait at least 5 seconds, and then plug it again.

Before disconnecting the power cord from the wall outlet, set the integrated amplifier to Standby.

If during idling the cover is too hot to touch, then ventilation needs to be improved.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents 9070 Important Safety Instructions Precautions Supplied Accessories Remote controller and two batteriesPower cord Features Contents Before Using the Integrated Amplifier Installing the BatteriesUsing the Remote Controller Installing the Integrated Amplifier 8ON/STANDBY button Getting to Know the Integrated AmplifierFront Panel Main in LEDL m n o Treble -/+ buttonsRear Panel Remote Controller Screw-type speaker terminals Connecting Your SpeakersConnections Banana Plugs North American modelsYou can also output audio from both sets of speakers Bi-wiring Connection TipConnecting the Power Cord Cable and JacksDigital Connection Coaxial or Optical Connecting a CD PlayerAnalog Connection Integrated Amplifier A-9070 CD Player C-7070Connecting an Onkyo Dock Digital Media TransportConnecting a Tuner Integrated Amplifier A-9070 Network Tuner T-4070Remote Control Connecting Onkyo u ComponentsAuto Power On Direct ChangeConnecting a Turntable Connecting a Cassette Tape DeckConnecting a Recording Component Using the Integrated Amplifier as a Preamplifier Integrated Amplifier A-9070 Power Amplifier M-5000RSeparating the Pre-amp and Main Amp Units Graphic equalizerUsing the Integrated Amplifier as a Power Amplifier Preamplifier P-3000R Integrated Amplifier A-9070Turning On/Off the Integrated Amplifier Operating with the remote controllerBasic Operations PressAdjusting the Volume Selecting Speakers a and Speakers BOperating on the integrated amplifier Adjusting the Display Brightness Using the Direct FunctionSelecting the Input Source Adjusting the Bass, Treble and Balance Press Bass -/+,TREBLE -/+, or Balance L/RChanging the Display Information Using Headphones Muting the SoundPress Muting Random button Controlling Other Onkyo ComponentsControlling the Onkyo CD Player Repeat buttonControlling the Onkyo Dock About Onkyo DockShuffle button Controlling the Onkyo Network Tuner #/$and Enter buttonsInput button Custom Setup Changing Input NamesSkipping Unused Inputs Setting the Headphone Level Press Setup Press !/repeatedly to select Hplvl Press EnterPress #/$repeatedly to adjust the offset level Press #/$to switch between ASb-ON and ASb-OFF ` ASb-ON Setting the Auto Standby FunctionPress Setup Press !/repeatedly to select ASb Press Enter ` ASb-OFFPress #/$repeatedly to select the route you want to set Setting the RoutePress Setup Press !/repeatedly to select Route Press Enter ` PRERestoring the Default Settings Press Setup Press !/repeatedly to select Reset Press EnterPress #/$to switch between RST-NO and RST-YES Troubleshooting Other Can’t control properly by using the remote controllerRemote controller doesn’t work properly No sound is heard from a connected componentSpecifications Audio InputsAudio Outputs 4 0 0 8 4

A-9070 specifications

The Onkyo A-9070 is a high-performance integrated amplifier that caters to audiophiles seeking exceptional sound quality and versatile connectivity options. Designed with a blend of modern technological advancements and classic analog principles, the A-9070 stands out as a powerhouse in its category.

At the heart of the A-9070 is its high-current capability, which ensures the delivery of dynamic sound reproduction across a varied range of frequencies. This integrated amplifier boasts an impressive power output of 100 watts per channel at 8 ohms, allowing it to drive speakers effectively while maintaining clarity and precision. The use of Onkyo’s Wide Range Amplification Technology (WRAT) ensures that audio signals remain faithful to the original source. The A-9070's transistors are meticulously selected, contributing to enhanced thermal stability and reliability.

Another hallmark feature of the A-9070 is its dual toroidal transformers, designed to minimize unwanted magnetic interference and ensure a clean power supply. This design significantly improves overall audio performance, enhancing detail, dynamics, and transient response. The amplifier also integrates a signal-to-noise ratio of 100 dB, which promotes a silent background, allowing listeners to experience every nuance in their favorite tracks.

The Onkyo A-9070 comes equipped with a variety of analog and digital inputs, facilitating seamless connectivity with multiple devices. There are four line inputs, a phono input for vinyl enthusiasts, and an optical and coaxial digital input for connecting to modern sources. Furthermore, the amplifier features a high-quality DAC (Digital-to-Analog Converter) capable of handling high-resolution audio files, which makes it suitable for both traditional and contemporary audio formats.

Additionally, the A-9070 is designed with user convenience in mind. The front-panel controls are intuitively laid out, and a remote control is included for easy access to all functions. The amplifier also features a dedicated headphone output, allowing for private listening sessions without compromising audio quality.

In conclusion, the Onkyo A-9070 combines exquisite craftsmanship with advanced technology, making it a formidable choice for audio enthusiasts. Its powerful amplification, robust build quality, and diverse connectivity options offer an unparalleled listening experience that caters to both vintage and modern audio setups. Whether you’re spinning vinyl or streaming high-resolution tracks, the A-9070 is designed to deliver rich, immersive sound that brings music to life.
Top Page Image Contents