BOXLIGHT cp-16t manual Appendix Lamp Replacement, Lamp Replace Counter

Page 39

APPENDIX

LAMP REPLACEMENT

When the life of Projection Lamp of this projector draws to an end, LAMP REPLACEMENT indicator lights yellow. When a projected image becomes dark or the color of an image becomes unnatural, replacement of Projection Lamp is required.

CAUTION

For continued safety, replace with a lamp assembly of the same type.

Allow a projector to cool for at least 45 minutes before you open Lamp Cover. The inside of a projector can become very hot.

CAUTION

Do not drop a lamp assembly or touch a glass bulb! The glass can shatter and may cause injury.

Follow these steps to replace the lamp assembly.

LAMP COVER

1

Turn off the projector and disconnect AC plug. Allow the

 

projector to cool for at least 45 minutes.

2

3

Remove a screw with a screwdriver to remove Lamp Cover.

Remove 3 screws with a screwdriver and pull out Lamp Assembly by grasping Handle.

4

Replace Lamp Assembly with a new one and tighten 3 screws

LAMP

HANDLE

 

back. Make sure that Lamp Assembly is set properly. Replace

 

Lamp Cover and tighten a screw.

ASSEMBLY

 

5

6

Connect AC Power Cord to the projector and turn it on.

Reset Lamp Replace Counter (refer to the section “Lamp Replace Counter” below).

NOTE : Do not reset Lamp Replace Counter when Projection

Lamp is not replaced.

ORDER REPLACEMENT LAMP

Replacement Lamp can be ordered through Boxlight at 1-800-762-5757 or 360-779-7901. ● Model No. of your projector : BOXLIGHT CP-16t

●Replacement Lamp Type No. : POA-LMP35

(Service Parts No. 610 293 2751)

LAMP REPLACE COUNTER

Be sure to reset Lamp Replace Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE Indicator stops lighting.

1

Turn projector on, press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to

 

move a red frame pointer to SETTING Menu icon (refer to page 35, 36).

2

Press POINT DOWN button to move a red frame pointer to “Lamp counter reset” and then press SELECT button. The

 

message "Lamp replace counter reset?" is displayed. Move the pointer to [Yes] and then press SELECT button.

3

Another confirmation dialog box appears and select [Yes] to reset Lamp Replace Counter.

Do not reset Lamp Replace Counter except after Projection Lamp is replaced.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Boxlight CP-16t To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Digital Zoom for Computer Features and DesignName of Each Part of Projector PreparationSETTING-UP Projector Connecting AC Power CordFor Continental Europe Preparation Positioning Projector Adjustable FeetPreparation Moving Projector Terminals of Projector Connecting ProjectorTerminals Projector Connecting to ComputerConnecting to Video Equipment Before Operation Operation of Remote ControlRemote Control Batteries Installation Power ON-OFF Button TOP Controls and IndicatorsHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARTurning OFF Projector Basic OperationTurning on / OFF Projector Turning on ProjectorPicture Freeze Function Adjusting ScreenZoom Adjustment Keystone AdjustmentDirect Operation Sound AdjustmentTimer Function Basic Operation No Show FunctionAuto Computer InputSelecting Input Source Selecting Computer SystemComputer Input Compatible Computer Specifications FreqKHz Auto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area Display area HFull screen Image Select Menu Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Input AV System Menu Component Video Selecting Video SystemAuto AV System Menu Video or S-VIDEOCinema Sharpness Video Input Image Level AdjustmentColor TintProvides image at a normal video aspect ratio of 4 Setting Setting MenuSetting Menu To change the code of Projector To change the code of the Remote Control UnitAppendix Operating Wireless MouseInstallation Operating Wireless MouseMaintenance AIR Filter Care and CleaningCleaning Projection Lens Lamp Replace Counter Appendix Lamp ReplacementTroubleshooting Function does not Remote Control UnitWireless Mouse Does not workOptional Parts Technical SpecificationsUSB Connector Series B Appendix Configurations of the TerminalsLimited Warranty

cp-16t specifications

The BOXLIGHT CP-16T is a versatile and advanced classroom projector designed to enhance the educational experience through its innovative features and robust performance. Engineered with the latest technology, this projector is ideal for teachers, trainers, and presenters who seek to engage their audiences effectively.

One of the main features of the BOXLIGHT CP-16T is its high-resolution imaging capability. With a resolution of 1920 x 1080 pixels, it provides crystal-clear visuals that bring presentations, videos, and educational materials to life. The brightness levels reaching up to 3,500 lumens ensure that images remain vibrant and visible even in well-lit environments. This capability is particularly valuable in classrooms where lighting cannot always be controlled.

The projector utilizes advanced LED technology, which not only extends the lifespan of the lamp but also reduces energy consumption significantly. This eco-friendly approach makes the CP-16T a sustainable choice for educational institutions looking to minimize their environmental footprint. Moreover, the long-lasting LED light source can offer up to 20,000 hours of use, allowing for less frequent replacements and reduced maintenance costs.

Connectivity is another standout feature of the BOXLIGHT CP-16T. It comes equipped with multiple input options, including HDMI, VGA, USB, and wireless capabilities, enabling users to connect a variety of devices, from laptops to tablets. This versatility makes it suitable for different teaching styles and technological platforms, facilitating seamless integration into existing classroom systems.

In addition to its connectivity options, the CP-16T integrates intuitive user controls and an easy-to-navigate interface, allowing educators to set up quickly and focus on delivering their content without technical disruptions. The projector’s lightweight design fosters portability, enabling users to transport it easily from one location to another.

Another key characteristic of the BOXLIGHT CP-16T is its built-in speaker system, which provides sufficient sound output for small to medium-sized classrooms. This feature eliminates the need for additional audio equipment in basic presentations, streamlining the setup process further.

Overall, the BOXLIGHT CP-16T stands out as a powerful educational tool equipped with high-definition imaging, extensive connectivity options, energy-efficient technology, and user-friendly features designed to enhance the teaching and learning experience.
Top Page Image Contents