Honeywell Comprehensive Guide to VISTA 128FBP and VISTA 250FBP Installation, Programming, and User Codes

Security Codes and Authority Levels (cont’d)

To Add a User

IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know (e.g. bypassing protection zones).

CODE

1. Enter Master or Manager code and press the

8

key.

2.Enter the new user's 3-digit User Number (002-250).

3.Enter 4-digit security code for that user. The following prompts will appear.

ADD NEW USER? 0 = NO , 1 = YES

USER NUMBER = 003

ENTER AUTH. LEVEL

Enter 1 to add a new user code. Entering 0 will change the existing user's code to the code entered in step 3. See Changing A User's Code section.

Enter the authority level, 1-6, for this user within

this partition.
1=master	2=manager	3=operator A
4=operator B	5=operator C	6=duress code

GROUP BYPASSING? 0 = NO , 1 = YES

ACCESS GROUP? ENTER 0-8

Enter 1 (YES) to allow this user to perform group bypasses. Enter 0 (NO) this user will not be able to perform group bypasses.

If access schedules have been programmed, this prompt appears. Enter the user's access group number (1-8) if this user should have limited access to the system. Enter 0 if no access group should be assigned.

RF BUTTON ?

0 = NO , 1 = YES

Not Used.

– 19 –