PREPARATION
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.5 degrees.
1 | Lift front of a projector and pull FEET LOCK LATCHES |
| on both sides of a projector. |
2 | Release FEET LOCK LATCHES to lock ADJUSTABLE |
| FEET and rotate ADJUSTABLE FEET to fine tune |
| position and tilt. |
3 | To shorten ADJUSTABLE FEET, lift front of a projector |
| and pull and undo FEET LOCK LATCHES. |
| Position and keystone distortion of image can be adjusted |
| using Menu Operation. (Refer to P 20 and 35.) |
NOTE :
THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. PROJECTION LAMP MAY MALFUNCTION.
ADJUSTABLE FEET | FEET LOCK |
| LATCHES |
MOVING PROJECTOR
Use Carry Handle when moving a Projector.
When moving a projector, replace lens cover and retract feet to prevent damage to lens and cabinet.
When this projector is not in use for an extended period, put it into case (dust cover) supplied with this projector.
CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR
●Do not drop or bump a projector, otherwise damages or malfunctions may result.
●When carrying a projector, use a suitable carrying case.
●Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a projector. To transport a projector through a courier or transport service, consult your dealer for best way.
10