BOXLIGHT MP-42T manual Basic Operation, Adjusting Screen, Zoom Adjustment, Focus Adjustment

BASIC OPERATION

ADJUSTING SCREEN

ZOOM ADJUSTMENT

1	Press ZOOM button on Top Control or ZOOM ▲ /▼ button on
	Remote Control Unit. Message “Zoom” is displayed.
2	Press ZOOM ▲ button or POINT UP button to make image
	larger, and press ZOOM ▼ button or POINT DOWN button to

make image smaller.

Zoom

Message disappears after 4 seconds.

FOCUS ADJUSTMENT

1	Press FOCUS button on Top Control or FOCUS ▲/▼ button on
	Remote Control Unit. Message “Focus” is displayed.
2	Adjust focus of image by pressing FOCUS ▲ /▼ button or
	POINT UP/DOWN button(s) .

NOTE;

Focus adjustment may not function properly if the image is corrected by KEYSTONE adjustment.

Focus

Message disappears after 4 seconds.

	LENS SHIFT ADJUSTMENT
1	Press LENS SHIFT button on Top Control or LENS SHIFT ▲/▼
	button on Remote Control Unit. Message “Lens shift” is
	displayed.
2
	Press POINT UP button or LENS SHIFT ▲ button to move
	image up, press POINT DOWN or LENS SHIFT ▼ button to

move image down.

�

Lens shift

�

�

	KEYSTONE ADJUSTMENT
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
1	Press KEYSTONE button on Remote Control Unit or select
	Keystone on SETTING menu. (Refer to page 35.) Keystone
	dialog box appears.
2	Correct keystone distortion by pressing POINT
	UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to	• Arrows are white in no correction.
	reduce the upper part of the image, and press POINT DOWN
		• Arrow(s) of direction being corrected turn(s) red.
	button to reduce the lower part. Press POINT LEFT button to	• Arrow(s) disappear(s) at the maximum
	reduce the left part, and press POINT RIGHT button to reduce	correction.
	the right part.

Reduce the upper width	Reduce the lower width	Reduce the left part with
with POINT UP button.	with POINT DOWN button.	POINT LEFT button.

Reduce the right part with POINT RIGHT button.

20