BOXLIGHT MP-385T manual SETTING-UP Projector, Connecting AC Power Cord

Page 8

PREPARATION

SETTING-UP PROJECTOR

CONNECTING AC POWER CORD

This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of type of power supply being in use.

Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.)

CAUTION

For safety, unplug AC Power Cord when an appliance is not used.

When this projector is connected to outlet with AC Power Cord, an appliance is in Stand-by Mode and consumes a little electric power.

Connect AC Power Cord (supplied) to a projector. AC outlet must be near this equipment and must be easily accessible.

NOTE ON POWER CORD

AC Power Cord must meet requirement of country where you use a projector. Confirm AC plug type with chart below and proper AC power cord must be used. If supplied AC Power Cord does not match AC outlet, contact your sales dealer.

Projector side

AC Outlet side

 

For U.S.A. and Canada

For Continental Europe

 

Ground

 

To POWER CORD

To AC Outlet.

 

CONNECTOR on a

To AC Outlet.

(120 V AC)

projector.

 

(200 - 240 V AC)

8

Image 8
Contents Boxlight MP-385t To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Compact Design Digital Zoom for ComputerPreparation Name of Each Part of ProjectorFor U.S.A. and Canada For Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Lens Shift Adjustment Preparation Positioning ProjectorPreparation Adjustable Feet Moving ProjectorConnecting Projector Terminals of ProjectorAudio Input Jacks BNC Input JacksConnecting to Computer Terminals A ProjectorConnecting to Video Equipment Audio VideoLaser Pointer Function Operation of Remote ControlBefore Operation Volume Button Wired Remote JackZoom Button Focus ButtonTOP Controls and Indicators Ready IndicatorFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Sound Menu Before Operation Menu BARGuide Window Turning OFF Projector Turning on / OFF ProjectorTurning on Projector Adjusting Screen Zoom AdjustmentLens Shift Adjustment Keystone AdjustmentSound Adjustment When Select Input 1 Computer Input Terminals When Select Input 2 5 BNC Input JacksComputer Input Selecting Input SourcePC Adjustment Auto PC AdjustmentComputer Input Automatic MULTI-SCAN System AutoComputer Input Manual PC Adjustment Computer Input Display areaDisplay area H Full screenComputer Input Compatible Computer Specifications Resolution640 x 31.469 59.940 1024 x 48.363 60.004Picture Image Adjustments Image Level Select DirectImage Level Select Menu Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo When Select Input 3 AV TerminalsVideo Input Component Video Signal Format Selecting Video SystemVideo Input Video Jack or S-VIDEO JackCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change code of Remote Control Unit To change code of ProjectorSETTING/APPENDIX Operating Wireless MouseInstallation Operating Wireless MouseCleaning Projection Lens MaintenanceAIR Filter Care and Cleaning Lamp Replace Counter Appendix Lamp ReplacementOrder Replacement Lamp Troubleshooting Service Technical Specifications Appendix Configurations of Terminals USB Connector Series BLimited Warranty Warranty Limitation and ExclusionDisclaimer or Unstated Warranties Limitation or Liability