BOXLIGHT XD-5m manual Setting UP the Projector

SETTING UP THE PROJECTOR

1Place the projector on a flat surface.

•The projector must be within 10 feet (3 m) of your power source and within 6 feet (1.8 m) of your computer.

•If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” on page 24 to reverse the image.

2Position the projector the desired distance from the screen.

•The distance from the lens of the projector to the screen and the zoom setting determine the size of the projected image. Figure 3 shows three projected image sizes. For more infor- mation about image size, see “Projected Image Size” on page 44.

	1
	3
	.
	0
	f
	t
	(
	6
	.
	0
	m
	)
	.
7
.
8
3	f
	t
.	.
2	(
f	2
t	.
(	4
1	m
m	)
)
.
	20 ft. (6.1m)
5 ft.	12 ft. (3.7m)
	(1.5m)

FIGURE 3

Projected image size at minimum zoom

3Make sure the projector is unplugged and your computer is turned off.

5