BOXLIGHT XD-5m manual Powering up the Projector and Adjusting the Image

Page 19

Powering up the Projector and Adjusting the Image

1Remove the lens cap.

2Plug the power cord into the side of the projector, then plug it into your electrical outlet. A surge-protected power strip is recommended.

•The fans start to run, and the Lamp LED on the top of the projector (Figure 11 on page 16) lights orange until the soft- ware has initialized. When initialization is complete, the Lamp LED lights green. A green Lamp LED indicates that you can press the lamp on/off button to turn the lamp on and off.

3Turn on the lamp by pressing the lamp on/off button on the keypad (see Figure 11 on page 16).

•The startup screen appears and the Lamp LED on top of the projector lights green.

4If you connected a video player, turn it on.

•The video image should display on the projection screen. If a computer source is active, press the source button on the keypad (page 16) or the video button on the remote to dis- play your video image. You can select a default source to determine which source the projector examines first during power-up for active video; see “Default Source” on page 24.

•Use the volume buttons to adjust the volume.

5Turn on your computer.

•The computer image should display on the projection screen. If a video source is active, press the source button on the keypad or the computer button on the remote to display your computer’s image. Make sure your laptop’s external video port is activated; see “Portable and Laptop Activation Chart” on page 38 for details.

•If necessary, make adjustments to the image using the pro- jector’s on-screen menus. To open the menus, press the menu button on the keypad or remote, then select the Dis- play or Image sub-menu. For more information about the menus, see page 18.

NOTE: Always use the power cord that shipped with the projector.

NOTE: With some computers, the order in which you power up the equipment is very important. Most computers should be turned on last, after all other peripherals have been turned on. Refer to your computer’s documentation to determine the correct order.

11

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Boxlight FCC Warning Canada Safety CertificationsEN 55022 Warning Trademarks Declaration of ConformityPage Table of Contents Index AppendixSafety Definitions Safety Symbols Safety InstructionsSafety Terms Important Operating Considerations Customer ServiceUnpacking the Projector Image ResolutionIntroduction CompatibilityT r o d u c t i o n Usage Guidelines If You Need Assistance WarrantySetting UP the Projector T t i n g O j e c t o r Do you want to play your computer’s audio on the projector? Connecting a ComputerT t i n g O j e c t o r Audio Adapter Composite video cable Audio cable Connecting a Video PlayerAudio Adapter Powering up the Projector and Adjusting the Image Turning Off the Projector Basic Image Adjustment Using the ProjectorUsing the Remote Control I n g O j e c t o r Adjusting the Projector Source keypad only Or Computer and Video remote only Using the Keypad and Remote ButtonsLamp on/off keypad only MenuStandby Volume keypad onlyUsing the On-Screen Menus Tint Display MenuBrightness ContrastColor Reset AllVolume Audio MenuManual Sync Image MenuAuto Image Auto ResizeHorizontal position Manual TrackingVertical position Video Standard Controls MenuStandby Time Plug and Play Default SourceRear Projection Auto Source SelectDisplay Startup Screen Language MenuStatus Menu Cleaning the Lens Maintenance & TroubleshootingReplacing the Projection Lamp Pull the lamp door up and remove it Lift and grasp the pull tab and lift the module out Figure Using the Kensington Lock Replacing the Batteries in the Remote ControlProblem Image isn’t centered on the screen Troubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem The screen resolution is not rightProblem Image is too wide or narrow for screen Problem Image is noisy or streaked Problem Image is out of focusProblem Image and menus are reversed left to right Problem no soundProblem Lamp shuts off Problem Lamp seems to be getting dimmerCall Boxlight at 1-800-762-5757 or Appendix SpecificationsStandard Accessories ship with the projector AccessoriesOptional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook ComputerDistance to Diagonal Width Height Screen ft/m Ft/m Projected Image SizeIndex D e Page Page Limited Warranty Part Number

XD-5m specifications

The BOXLIGHT XD-5m is a cutting-edge interactive display solution designed for educational and professional environments. This model stands out due to its impressive features, advanced technologies, and user-friendly characteristics, making it an ideal choice for enhancing collaboration and engagement.

One of the hallmark features of the BOXLIGHT XD-5m is its high-resolution display. With a 4K UHD resolution, the interactive display offers stunning image clarity and vibrant colors, ensuring that every detail is crystal clear. This capability is crucial for presentations, lessons, or meetings where visual impact is essential.

The display incorporates advanced touchscreen technology, allowing for smooth multi-touch functionality. Users can intuitively interact with the screen using gestures, which simplifies navigation and enhances interactivity. This feature is particularly beneficial in educational settings, where students can engage directly with the content, promoting an interactive learning environment.

The BOXLIGHT XD-5m is equipped with a powerful built-in Android operating system, providing users with access to a wide range of applications directly from the display. This eliminates the need for additional devices, streamlining the workflow and making it easier to present and collaborate. The display can also connect to various devices, including laptops, tablets, and smartphones, via multiple connectivity options such as HDMI and USB, enhancing its versatility in diverse settings.

One of the standout technologies within the BOXLIGHT XD-5m is its advanced whiteboarding capabilities. Users can digitally annotate, draw, and save their work directly on the screen, making it an effective tool for brainstorming and collaborative discussions. This functionality not only fosters creativity but also ensures that ideas can be captured and shared in real time.

The device's design prioritizes accessibility and ease of use. With features such as adjustable height and an anti-glare screen, users can facilitate viewing from different angles and distances. Additionally, the XD-5m is built with durability in mind, ensuring it can withstand the rigors of daily usage in classrooms or offices.

Incorporating a range of smart technologies, the BOXLIGHT XD-5m is a robust interactive display that elevates communication and collaboration in various settings. Its impressive combination of high-resolution visuals, advanced functionality, and user-friendly design positions it as a leading choice for those seeking an effective and engaging interactive solution.
Top Page Image Contents