BOXLIGHT CP-322I user manual Related Messages

Page 37

CP-S317/327W/Vol2-E責了03.5.27 2:31 PM ページ 7

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED

Related Messages

When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below.

Message

Description

 

 

CHANGE THE LAMP

Lamp usage time is approaching 2,000 hours. (Note 2)

AFTER REPLACING LAMP,

Preparation of a new lamp, and an early lamp change, is

recommended. After you have changed the lamp, please be

RESET THE LAMP TIMER.

(Note 1)

sure to reset the lamp timer.

 

 

CHANGE THE LAMP

Lamp usage time is approaching 2,000 hours. A lamp change

within ** hours is recommended. (Note 2)

AFTER REPLACING LAMP,

When lamp usage reaches 2,000 hours, the power will

RESET THE LAMP TIMER.

automatically be turned OFF. Please change the lamp by

THE POWER WILL TURN OFF

referring to “THE LAMP” in Vol.1 (Basic). After you have

AFTER ** hr.

changed the lamp, please be sure to reset the lamp

(Note 1)

timer.

 

 

CHANGE THE LAMP

As lamp use has reached 2,000 hours, the power will soon be

automatically turned OFF. (Note 2)

AFTER REPLACING LAMP,

Please immediately turn the power OFF, and follow the

RESET THE LAMP TIMER.

instructions in the “THE LAMP” section of the separate booklet,

THE POWER WILL TURN OFF

Vol.1 (Basic).

After you have changed the lamp, please be sure to reset the

AFTER 0 hr.

 

lamp timer.

CLEAN THE AIR FILTER

A note of precaution when cleaning the air filter.

AFTER CLEANING AIR FILTER,

After cleaning the filter, operate FILTER TIME of the OPTION

RESET THE FILTER TIMER.

Menu, and perform reset of the filter timer.

 

 

NO INPUT IS DETECTED

There is no input signal.

Please confirm the signal input connection, and the status of the

ON ***

signal source.

 

 

 

SYNC IS OUT OF RANGE

The horizontal or vertical wavelength of the inputted signal is

outside of the response parameters of this unit. Please confirm

ON *** fH *****kHz fV *****Hz

the specs for this unit or the signal source specs.

 

 

 

The internal portion temperature is rising. Please turn the power

 

OFF, and allow the unit to cool down for approximately 20

 

minutes. After having confirmed the following items, then please

CHECK THE AIR FLOW

resent the power to ON.

 

• Is there blockage of the air passage aperture?

 

• Is the air filter dirty?

 

• Does the peripheral temperature exceed 35°C?

 

 

NOTES

Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be reappeared every time the power is turned ON.

Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This unit is equipped with an automatic shut-down function, such that the power will automatically be turned OFF when lamp usage time has reached 2,000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic shut-down function of this unit.

7

Image 37
Contents CP-322i Contents Projector Features Power cord Devices you will be using to the projectorReference Part NamesFreeze button Keyboard buttons Auto button Blank button Volume button Mute buttonPosition button Cursor buttonsAdjusting the Projectors Elevator Feet Setting UP the ProjectorScreen Adjusting the Screen Size and Projection DistanceTop view Side view Indicates the corresponding reference Connecting Your DevicesFunction Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Putting batteries into the remote control unit Using the Remote ControlOperating the remote control Turning on the Power Selecting an Input Signal Turning OFF the Power Press the Volume button Adjusting the VolumePress Buttons to adjust Volume Temporarily Muting the SoundUse Buttons to adjust Position Adjusting the PositionPress the Position button Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionFreezing the Screen Using the Magnify FeatureSelecting the Aspect Ratio Signal SearchingTemporarily Blanking the Screen Select a menu using Buttons Then press Or Enter button Using the Menu FunctionsSelect an item using Buttons, then press Or Enter button Press Buttons to adjust the levelOperating the PC Screen Available Functions Remote Control OperationLamp High Voltage High Temperature High PressureDo not use the projector with the lamp cover removed Replacing the lamp Caring for the air filter AIR FilterReplacing the air filter Other Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Picture 2 Menu Picture 1 MenuPICTURE1 Menu PICTURE2 MenuInput Menu Input MenuAuto VideoScreen Menu Screen MenuBlank Start UPOption Menu VolumeOption Menu Auto OFFRelated Messages Power Lamp Temp Regarding the Indicator LampsVol.2-2 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-3 Vol.2-6Dimension Diagram SpecificationsSpecification Unit mmWarranty and AFTER-SERVICE Signal Terminal Specification Signal Connector PIN AssignmentRGB in 1/2 Sub 15-pin ShrinkResolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalInitial SET Signals ADB Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseConsist of header 7 bytes + command data 6 bytes Command dataRS-232C Communication ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment command日本語 Command data chartBe EF BA D2 Be EF FD D3 Be EF Ntsc PAL Regulatory Notices Limited Warranty Disclaimer of Unstated Warranties

CP-322I specifications

The BOXLIGHT CP-322I is a versatile and innovative interactive projector designed to enhance the educational experience in classrooms and meeting spaces. This model is particularly valuable for teachers and presenters who are looking to engage their audience through dynamic and interactive presentations. One of its standout features is its interactive capabilities, allowing users to turn any surface into an interactive whiteboard. This is made possible through the integration of the interactive pen, enabling on-the-fly annotations and collaborations, thereby fostering a more engaging learning environment.

The CP-322I boasts a resolution of 1280 x 800 (WXGA), delivering bright and clear images with vibrant colors. With a brightness level of 3,200 lumens, it can adapt to various lighting conditions, making it suitable for both dimly lit and well-lit environments. The projector also offers a contrast ratio of 16,000:1, ensuring that visuals remain sharp and distinct, which is crucial for presentations that rely on detailed graphs and images.

In terms of connectivity, the BOXLIGHT CP-322I is equipped with multiple options, including HDMI, USB, and VGA ports, allowing users to connect a wide variety of devices such as laptops, tablets, and smartphones. This flexibility ensures that presenters can seamlessly integrate their technology into the presentation setup. Additionally, it supports wireless connectivity, allowing for the projection of content without the clutter of cables.

The CP-322I utilizes DLP (Digital Light Processing) technology, which contributes to its reliable performance and longevity. DLP projectors are known for their low maintenance, reducing the need for frequent lamp replacements and making them cost-effective over time. Coupled with its eco-friendly design, which includes energy-saving features, this projector is an excellent option for environmentally conscious institutions.

Another significant characteristic of the BOXLIGHT CP-322I is its user-friendly interface, which simplifies operating the projector and managing presentations. The intuitive controls and menu settings make it accessible for users of all tech-savviness levels.

In summary, the BOXLIGHT CP-322I is not only an interactive projector but also a multifaceted educational tool that enhances engagement, ensures high-quality visuals, and integrates seamlessly with various technologies, making it an ideal choice for modern classrooms and meeting rooms.