BOXLIGHT CP-322I user manual Picture 1 Menu, Picture 2 Menu, PICTURE1 Menu, PICTURE2 Menu

Page 33

CP-S317/327W/Vol2-E責了03.5.27 2:30 PM ページ 3

PICTURE 1 Menu

With the PICTURE 1 menu, the five items shown in the Table below can be performed.

Perform each operation in accordance with the instructions in the Table.

MENU

MAIN

COLOR BAL R

PICTURE-1

COLOR BAL B

PICTURE-2

SHARPNESS

INPUT

COLOR

SCREEN

TINT

OPTION

 

12

: SELECT

Example : PICTURE1 Menu

(COLOR BAL R)

PICTURE1 Menu

Item

 

 

Description

 

 

 

COLOR BAL R

Adjust Red Color Balance: Dark

Light

 

 

COLOR BAL B

Adjust Blue Color Balance: Dark

Light

 

 

SHARPNESS

Adjust Sharpness (for VIDEO/S-VIDEO): Clear

Soft

COLOR

Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):

 

Dark

Light

 

 

 

 

 

 

 

 

 

TINT

Adjust Tint (for VIDEO/S-VIDEO):

Green

Red

 

PICTURE 2 Menu

With the PICTURE 2 menu, the five items shown in the Table below can be performed.

Perform each operation in accordance with the instructions in the Table.

MENU

MAIN

V POSITION

PICTURE-1

H POSITION

PICTURE-2

H PHASE

INPUT

H SIZE

SCREEN

OVER SCAN

OPTION

 

12

: SELECT

Example : PICTURE2 Menu

(V POSITION)

PICTURE2 Menu

Item

 

 

 

Description

 

 

 

 

 

 

 

V POSITION

Adjust Vertical Position (for RGB):

Up

Down

 

 

 

 

H POSITION

Adjust Horizontal Position (for RGB): Left

Right

 

 

 

Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):

H PHASE

Right

Left

 

 

 

 

 

• Adjust to eliminate flicker.

 

 

 

 

 

 

 

 

 

H SIZE

Adjust Horizontal Size (for RGB):

Large

Small

• If the horizontal size adjustment is excessive, the image may not be displayed

 

correctly. In such a case, initialize H SIZE with the RESET button.

 

 

 

Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):

OVER SCAN

LARGE

MIDDLE

SMALL

 

• It is recommended to select SMALL to avoid flicker at the lower part of the

 

 

picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Image 33
Contents CP-322i Contents Projector Features Power cord Devices you will be using to the projectorReference Part NamesFreeze button Keyboard buttons Auto button Blank button Volume button Mute buttonPosition button Cursor buttonsAdjusting the Projectors Elevator Feet Setting UP the ProjectorAdjusting the Screen Size and Projection Distance ScreenTop view Side view Indicates the corresponding reference Connecting Your DevicesFunction Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Using the Remote Control Putting batteries into the remote control unitOperating the remote control Turning on the Power Selecting an Input Signal Turning OFF the Power Press the Volume button Adjusting the VolumePress Buttons to adjust Volume Temporarily Muting the SoundAdjusting the Position Use Buttons to adjust PositionPress the Position button Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionFreezing the Screen Using the Magnify FeatureSignal Searching Selecting the Aspect RatioTemporarily Blanking the Screen Select a menu using Buttons Then press Or Enter button Using the Menu FunctionsSelect an item using Buttons, then press Or Enter button Press Buttons to adjust the levelOperating the PC Screen Available Functions Remote Control OperationHigh Voltage High Temperature High Pressure LampDo not use the projector with the lamp cover removed Replacing the lamp Caring for the air filter AIR FilterReplacing the air filter Other Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Multifunctional Settings Main MenuMain Menu Picture 2 Menu Picture 1 MenuPICTURE1 Menu PICTURE2 MenuInput Menu Input MenuAuto VideoScreen Menu Screen MenuBlank Start UPOption Menu VolumeOption Menu Auto OFFRelated Messages Power Lamp Temp Regarding the Indicator LampsVol.2-2 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-3 Vol.2-6Dimension Diagram SpecificationsSpecification Unit mmWarranty and AFTER-SERVICE Signal Terminal Specification Signal Connector PIN AssignmentRGB in 1/2 Sub 15-pin ShrinkResolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalInitial SET Signals ADB Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseConsist of header 7 bytes + command data 6 bytes Command dataRS-232C Communication ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment command日本語 Command data chartBe EF BA D2 Be EF FD D3 Be EF Ntsc PAL Regulatory Notices Limited Warranty Disclaimer of Unstated Warranties

CP-322I specifications

The BOXLIGHT CP-322I is a versatile and innovative interactive projector designed to enhance the educational experience in classrooms and meeting spaces. This model is particularly valuable for teachers and presenters who are looking to engage their audience through dynamic and interactive presentations. One of its standout features is its interactive capabilities, allowing users to turn any surface into an interactive whiteboard. This is made possible through the integration of the interactive pen, enabling on-the-fly annotations and collaborations, thereby fostering a more engaging learning environment.

The CP-322I boasts a resolution of 1280 x 800 (WXGA), delivering bright and clear images with vibrant colors. With a brightness level of 3,200 lumens, it can adapt to various lighting conditions, making it suitable for both dimly lit and well-lit environments. The projector also offers a contrast ratio of 16,000:1, ensuring that visuals remain sharp and distinct, which is crucial for presentations that rely on detailed graphs and images.

In terms of connectivity, the BOXLIGHT CP-322I is equipped with multiple options, including HDMI, USB, and VGA ports, allowing users to connect a wide variety of devices such as laptops, tablets, and smartphones. This flexibility ensures that presenters can seamlessly integrate their technology into the presentation setup. Additionally, it supports wireless connectivity, allowing for the projection of content without the clutter of cables.

The CP-322I utilizes DLP (Digital Light Processing) technology, which contributes to its reliable performance and longevity. DLP projectors are known for their low maintenance, reducing the need for frequent lamp replacements and making them cost-effective over time. Coupled with its eco-friendly design, which includes energy-saving features, this projector is an excellent option for environmentally conscious institutions.

Another significant characteristic of the BOXLIGHT CP-322I is its user-friendly interface, which simplifies operating the projector and managing presentations. The intuitive controls and menu settings make it accessible for users of all tech-savviness levels.

In summary, the BOXLIGHT CP-322I is not only an interactive projector but also a multifaceted educational tool that enhances engagement, ensures high-quality visuals, and integrates seamlessly with various technologies, making it an ideal choice for modern classrooms and meeting rooms.