BOXLIGHT XP-5t SETTING-UP the Projector, Connecting the AC Power Cord, For Continental Europe

Page 8

PREPARATION

SETTING-UP THE PROJECTOR

CONNECTING THE AC POWER CORD

This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect the projector with the peripheral equipment before turning the projector on. (Refer to pages 11 ~ 13 for connection.)

CAUTION

For safety, unplug the AC Power Cord when the appli- ance is not used.

When this projector is connected to the outlet with the AC Power Cord, the appliance is in Stand-by Mode and consumes a little electric power.

Connect the AC Power Cord (supplied) to the projector.

The AC outlet must be near this equipment and must be easily accessible.

NOTE ON THE POWER CORD

The AC Power Cord must meet the requirement of the country where you use the projector. Confirm the AC plug type with the chart below. The proper AC power cord must be used. If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.

Projector side			AC Outlet side


		For the U.S.A. and Canada				For Continental Europe


			Ground

To the POWER CORD
To the POWER CORD		To the AC Outlet.
CONNECTOR on the		To the AC Outlet.
CONNECTOR on the		(120 V AC)		To the AC Outlet.
projector.		(120 V AC)		To the AC Outlet.
				(200 - 240 V AC)
				(200 - 240 V AC)

8

Image 8

Contents Boxlight XP-5t To the Owner Safety Instructions Voor de klanten in NederlandAC Power Cord Requirement CompliancesTable of Contents Features and Design ComputersColor Systems Component VideoPreparation Name of Each Part of the ProjectorHOT AIR Exhausted Zoom Ring Focus RingFor Continental Europe SETTING-UP the ProjectorConnecting the AC Power Cord Room Light Adjustable FeetPreparation Positioning the Projector Preparation Moving the Projector Connecting the Projector Control Port ConnectorTerminals of the Projector Pb/Cb Pr/CrTerminals Projector Connecting to the Video EquipmentConnecting the Projector Connecting to the Computer Terminals of the ProjectorControl Cable for PS/2 Port ComputerOperation of the Remote Control Before OperationRemote Control Batteries Installation TOP Controls and Indicators TeleFlow of ON-SCREEN Menu HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Setting Menu Before Operation Menu BARBasic Operation Turning on / OFF the ProjectorTurning on the Projector Turning OFF the ProjectorAdjusting the Image Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Selecting Computer System Computer ModeSelecting Computer Mode Computer Mode Compatible Computer Specifications ResolutionFreq KHzPC Adjustment AdjustTotal lines Total dotsHorizontal / Vertical ClampPicture Image Adjustments Normal FunctionPicture Position Adjustment Computer Mode Auto Image FunctionImage PositionPicture Screen Adjustment Expand functionCompress function Panning functionVideo Mode Selecting Video ModeSelecting Video Source AutoWide Selecting Color SystemRegular Picture Image Adjustment Adjusting the Picture ImageColor TintSetting Setting MenuLamp age Power managementSelecting Language Operating Wireless Mouse InstallationOperating Wireless Mouse AppendixMaintenance Temperature Warning IndicatorAIR Filter Care and Cleaning Cleaning the Projection LensLamp Assembly Lamp Cover Handle Appendix Lamp ReplacementLamp Replacement Monitor Timer Troubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Limited Warranty